628221
4
Zoom out
Zoom in
Previous page
1/8
Next page
is hot . Note that the surface remains warm
for several minutes after use.
- Always leave the iron on its stand ( 2 ).
- The iron should be disconnected in the fol-
lowing circumstances :
- Immediately after use.
- Before cleaning or maintenance.
- If it’s not working properly .
- If you want to move or manipulate it.
- Never pull the cord to unplug the appliance.
- Your MAXIVAPORE PLUS is designed to
be used by adults. It’s not recommended
for use by people with physical, sensory, or
lack of experience, unless they have been
instructed in its use by a person responsi-
ble for their safety .
- This appliance is not a toy, do not let at
reach of children .
- CAUTION: Do not submerge the device in
liquid.
- Never use the appliance in the following
circumstances :
- If the unit has been hit by fall.
- If the unit is leaking water.
- If the power cord is damaged; it must
be replaced by a qualified technician
or service personnel. Never handle it
yourself.
- MAXIVAPORE PLUS has been designed for
domestic use only , any misuse or do not
follow the instructions of this manual voids
the warranty.
Features
- Power supply: 230V -50Hz
- Maximum Power: 2600W
- Water tank capacity : 800ml
Description
1: Base water tank
2: Support insulating
3: steam control button
4: Continuous steam button
5 : Thermostat Button
6: Heat Indicator Light
7: Water tank cap
8: Steam indicator light
9: Steam ejectors
10: Power cable base
11: Power cord of the iron
12: Glass Dispenser
13 : Funnel
Instructions for use
• Filling the tank :
- Check that the device is not plugged in be-
fore filling the tank.
- Turn the filler cap ( 7 ) in counter-clockwise
and remove it.
- Fill the tank with water to the MAX indicated
on the side of the tank. Use water with no
additives or perfume. If your local supply
has high levels of lime, use distilled water.
Note that failures caused by lime supply
are not covered by warranty.
- Close the cap by turning it clockwise.
• Selecting the ironing temperature and
commissioning:
- Set the desired temperature by turning the
thermostat knob ( 5 ) until the indicator light
turns heat ( 6 ) , following the indicator of
tissue types .
- Connect the equipment.
- Adjust the level of steam ( 9 ) between 0
and MAX depending on the desired intensity
(steam or dry ) .
- The iron base will begin to heat . The steam
light (8 ) and (6 ) heat indicator light will il-
luminate indicating that it has reached the
maximum operating temperature .
Symbol of the garment Indication
Do not iron
Synthetic fabric,
nylon or silk
Wool
Cotton, flax
Manual MaxiVapore Plus.indd 4 13/09/13 14:33
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xsquo MaxiVapore-Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xsquo MaxiVapore-Plus in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info