559901
58
Zoom out
Zoom in
Previous page
1/84
Next page
18
English
Initial Installation
On the left side of the screen there is a list of satellites for which HRS8560 is pre programmed.
Settings of the chosen satellite is displayed on the right side.
Process:
Select the first satellite to be set up with CH+/CH-
Press the OK button. The chosen satellite is marked with a hook, comfirming this satellite will
be considered in the coming channel scan.
Press the button VOL+ to access to right side.
Select the option with CH+/- and change the parameter with VOL+/-
Press Menu after defining all parameters for this satellite to get back to the left side.
If your satellite system can receive signals from a number of satellites, select a further satel-
lite with CH+/-. Press OK and define the parameter on the right side.
Repeat this procedure for all satellites availabe for your receiver.
Notes:
Dish Setup-Procedure
After a correct setting, an approximate value of the signal qualty will be shown on the lower part
of the menu.
If a satellite is missing on the list, press the RED button. A dialogue winter appears, input the
value for longitude, East/West and frequency, and choose “Blind Scan” in the coming channel
scan. If you add a satellite to the list, there will be no display of the signal quality for this
satellite, in spite of correct setting. Signal quality could only be displayed for satellites with pre
installed transponder lists.
Press GOTO to display the Transponder of the chosen satellite. Add new transponder with the
RED button and mark the transponder for channel scan with OK.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HRS 8564 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HRS 8564 in the language / languages: English, German as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info