Thank you for purchasing our products. To ensure prolonged use and optimum performance please read this instruction
manual carefully familiarize yourself with the terms of warranty. We suggest that you keep this instruction manual at
hand and refer to it whenever required.
and
1. Pull out the crown for a click, set the hands by
turning the crown in either direction to the
desired hour and minute time.
2. Push the crown to the normal position to start.
HOW TO SET TIME:
EL light :
1. HOW TO USE EL BUTTON:
1. Press the button, the backlight of the watch will be on.
2. The backlight of the watch use an electroluminescent (EL) light.
3. Frequent use of the backlight shortens the EL battery life.
At the first sign of low power (no light or dim display) have the battery replace by our authorized distributor.
1. Opening the case back, you will see 1pcs CR2016 battery . Remove the contact spring pressed on the battery and
take out the dead batteries.
2. Place the new battery and screw spring tightly. EL brightness should be the original situation.
3. Close case back.
HOW TO REPLACE BATTERY FOR EL :
TO PRESERVE THE QUALITY OF YOUR WATCH:
1. As this watch contains precise electronic components, it is suggested that the back cover be removed only by
authorized person.
2. Do not operate pushers when the watch is wet or in water.
3. If the watch is used in water, or it is wet, wipe it thoroughly dry.
4. Should water or coidensation appear in the watch, immediately open the case back and leave it air dry because
water can corrode electronic parts inside the case.
5. Although the watch is designed to withstand shocks under normal use, it is inadequate to subject it to rough impact.
6. Clean the watch with a soft cloth or water. Never use chemical solution.
7. Avoid exposure the watch to chemicals such as gasoline, aero spray, paints etc, those chemical action will damage
watch.
8. Avoid wearing the watch in electro magnetic condition, or put watch under strong light for too long.
HOW TO REPLACE MOVEMENT BATTERY:
1. take out battery CR2016.
2. Remove the insulator on the movement, you will see movement battery SR626SW. Take out the dead battery.
3. Place new battery and install CR2016, close case back.
4. Adjust the hand at the correct time.
NOTE: Avoid short circuit or exposing the battery in fire.
For Analog Watch With EL Light
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Xonix RN-1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Xonix RN-1 in the language / languages: English as an attachment in your email.
The manual is 0,05 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
