Manual Xonix HRM heart rate monitor watch (page 2 of 5) (English)

552982

Zoom out

Zoom in

1/5

5 6

7 8

9 10

Time

Countdown Timer

Recall

Calorie

Press button S3 to switch mode

Alarm

HRM

Stopwatch

Fig. 2 Mode Switch

D. Button S4（SET/EL）

1. Under non-setting mode, press S4 and the backlight will light up

for 3 seconds. When the backlight is up, any button press will

extend the backlight for 3 seconds.

2. Under non-setting mode, press and hold S4 for 2 seconds to

enter setting mode.

3. Under setting mode, press S4 to save new settings and exit

setting mode. (If no button operation in one minute, settings are

saved automatically and exit setting mode.)

3 Time Function and Operation

3.1 Time Operation

There are two time zones: local time zone and second time zone.

Press S1 to switch time zones. (Fig. 3)

Local time zone: display the time in HH:MM seconds (in lower

half), and day of week, day and month (in upper half). It displays

PM icon in 12-hour format after 11:59 a.m. When hourly chime is on,

chime icon is displayed. Press S2 to turn ON/OFF hourly chime.

Second time zone: display the time in HH:MM seconds. It

displays PM icon in 12-hour format after 11:59 a.m.

S3 S3

S3S3

Local Time Zone

Second Time Zone

Hourly Chime ON

Fig. 3 Time Zone Switch

3.2 Time Setting

3.2.1 Local Time Zone

Press and hold S4 for 2 seconds to enter time setting mode.

Press S3 (Mode) to switch among below eight settings:

Second →Minute →Hour →Year →Centennial →Month →Day

→12hour or 24hour format

The target setting-item will flash.

Press S1 to advance digit and hold the button for fast advance.

Press S2 to decrease digit and hold the button for fast decrease.

When setting second, press S1 or S2 and second digit will

return to zero. If the second digit is greater than 29, minute digit will

increase by 1.

Local time setting is shown in Fig. 4.

Long press S4 for 2 seconds

Setting Mode

Second Setting Minute Setting Hour Setting

Range：0~59 Range：(0~23)/(1~12)

Year Setting

Centennial Setting

Range：0~99

Range: 20~99

Month Setting

Range：1~12

Day Setting

Range：1~31

Range：12/24

12/24 Hour Setting

Second digit returns

to zero

S1 or S2

Fig. 4 Local Time Setting

3.2.2 Second Time Zone

Press and hold S4 for 2 seconds to enter time setting mode.

Press S3 to switch between below settings.

Press S1 to advance digit and hold the button for fast advance.

Press S2 to decrease digit and hold the button for fast decrease.

When setting minute, the minute digit increases or decreases

by 30 at a time.

Second time setting is shown in Fig. 5.

Minute → Hour

Second Time Zone

Long press S4 for 2 seconds

Minute Setting Hour Setting

30 minutes increase or

decrease at a time

Fig. 5 Second Time Setting

4. Heart Rate Function and Operation

4.1 Heart Rate Measurement (HRM) Mode

4.1.1 HRM Operation

Press S3 to switch to HRM mode. After enter HRM mode, HR

measurement circuit is activated automatically. If there is no heart

rate signal or heart rate is inconsistent, the measurement function

will be inactivated automatically after a certain time to save power.

Press S1 to activate or inactivate the HRM function. (Fig. 6)

To get your heart rate reading, place the watch on your wrist,

cover the 2 sensor areas with your finger pads and make sure there

is enough contact area. Please contact sensors with the same

strength, relax your arms and stay still to ensure the accuracy of

heart rate reading.

If the temperature is low, please rub your hands to make them

warmer. If the climate is dry, please moisten your fingers with water

before contact sensors.

Place the watch on your wrist and

then press button S3 (Mode) to

switch to HRM mode.

Cover the 2 sensor areas with

your finger pads and make

sure there is enough contact area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xonix HRM heart rate monitor watch in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xonix HRM heart rate monitor watch Manual

Product: