730159
3
Zoom out
Zoom in
Previous page
1/6
Next page
User’s manual
Wiring:
1. Turn o the power. During installation, replacement or disassembly of the
luminaire, make sure that there is no current supply. Otherwise, in case of
touching the wires, there is a risk of electric shock, which can lead to human
casualties!
2. Ensure that there is a reliable ground connection at the lamp installation
site. The lamp can also be used if there is no ground connection, however,
any contact with the device is prohibited during operation. Otherwise, it may
result in electric shock.
3. Alternate connection of a three-core cable - phase, zero and grounding
wire. Use a Phillips screwdriver # 2 for xing. After xing all the cogs, slightly
slide the lamp to check the reliable contact of the wires! To prevent the
formation of a shadow in the lamp, remove the excess ends of the cables
near the connecting terminal, the wires must t snugly against the lamp
base.
Top panel:
1. Turn the cover clockwise.
The lighting device must be grounded!
2. Ensure that the plafond is properly installed and securely locked.
Notes:
1. The lighting device must be installed in an installation method, all
contacts must comply with the electrical standard of the IEEE or the
national standard.
2. During installation, changing or disassembling the device, make sure that
there is no current supply. Otherwise, in case of touching the wires, there is
a risk of electric shock, which can lead to human casualties!
3. This light can be controlled by a remote control or mobile application.
Turning o the lamp using the remote control or the mobile application does
not mean that the device is de-energized. In this case, it is forbidden to
touch, change, correct the location of the lamp or disassemble it, otherwise
an accident may occur.
4. The plafond of the lamp is fragile, gently follow the installation!
User’s manual
02. Using a Lamp
- On / O: Use the wall switch to turn on / o the light.
- Changing the luminescence mode: when on, for 3 seconds, switching to
the next glow mode (this function can be disabled in the APP).
- Night light:
Method 1: Turn on this glow mode in the APP.
Method 2: Press and hold the power button on the remote control for 3
seconds.
Method 3: If there is a network connection in a dark room, from 23:00
to 6:00 AM click on any button to turn on the night light. Please read the
operating instructions or the operating instructions of the remote control
carefully.
- Automatic color temperature control: after connecting to the mains, the
lamp can automatically adjust the color temperature according to local time
and latitude / longitude. If you adjust the brightness of the glow and the
color temperature in manual mode, the automatic color temperature control
function is turned o. If you want to turn this function back on, you need to
turn the lamp o / on again with the wall switch or turn it on in the APP.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi MiJia Philips ZhiRui EyeCare Smart Ceiling Lamp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi MiJia Philips ZhiRui EyeCare Smart Ceiling Lamp in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info