730157

Xiaomi MiJia Honeywell Smoke Detector Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
1. When the charge level is insucient, the yellow status indicator will ash once
and the audio signal will turn on at the same time. Please change the battery as
soon as possible;
2. If there is insucient charge, press the «Sound stop / Self-check» button to turn
o the sound signal for about 12 hours;
3. If there is insucient charge, press and hold the «Sound Stop / Self-Check»
button for 3 seconds to restore the normal operation of the fault signal.
Honeywell Smoke Detector can not only be used alone, but it can also interface
with ZigBee wireless technology and an updated version of the multifunction
gateway. By connecting the re alarm to the multifunction gateway, in case of
an unforeseen situation and smoke accumulation in the room, both devices
simultaneously sound an alarm and send you a notication to the mobile phone
via the APP. Also, with the help of the application, the device can perform a self-
test so that you are sure of the normal operation of all re alarm functions.
* First, connect the Honeywell Smoke Detector to the multifunction gateway, then
install it in the appropriate location.
* Before pairing devices, make sure that the multifunction gateway is functioning
properly.
Low battery warning function
Battery Change
1. Remove the alarm (see section «Installation»);
2. Remove the battery, press and hold the «Sound Stop / Self-check» button for 5
seconds (use the residual charge to avoid false alarms on low battery level);
3. Insert a new battery;
4. Press and hold the «Sound Stop / Self-check» button for 1 second, after which
the device can perform a self-test, and you will hear a light and sound signaling
indicating its normal operation.
Denial of responsibility
1. The company reserves the right to change a description of this product, the
method of its use, and technical characteristics, etc. without prior notice;
2. The appearance of the device may slightly dier from the image in the
instruction, due to the peculiarities of the printing house and other reasons;
3. The information provided is for information only and is not a form of obligation;
4. All rights reserved, the company reserves all rights. Without the written
permission of the company, no other company or individual is entitled to create a
full or partial copy of the instruction, nor is it entitled to distribute this product.
Connection function
Connect to the net
1. Installing the APP
In the Store, nd and install «Mi Home».
* If the APP is already installed, you can skip this step.
To nd even more Smart devices, sign up for Mi Home APP.
2. Adding a new device
Make sure the battery is securely attached to the device. Open Mi Home APP,
select the multifunction gateway to which you want to connect the device, and
then click on the «add device» icon on the main page and select «re alarm». In
accordance with the APP manual, make the settings and select the multifunction
gateway notication language. Connection of devices is completed.
* If you can not connect the devices, place the Honeywell Smoke Detector closer
to the multifunction gateway and try again
* After successfully adding a device, you do not need to perform additional
settings. The devices will simultaneously signal a dangerous situation, and send
an alert.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xiaomi MiJia Honeywell Smoke Detector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xiaomi MiJia Honeywell Smoke Detector in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info