When using this product follow these precautions at all times.
• Use only the appropriate size batteries
• Be sure to follow the correct polarity when installing
the batteries as indicated in the battery compartment.
Incorrect polarity may cause damage to the alarm.
• Do not mix different types of battery such as Alkaline
and Carbon-zinc or old batteries with new.
• If the alarm is not used for long periods of time, remove
the batteries to prevent damage or injury from possible
battery leakage.
• Do not recharge batteries not intended to be recharged
as they can overheat and rupture. (Always follow the
manufacturer’s directions.)
Installation
1. Place the siren in the desired location.
2. Remove the back cover and fix it to the wall using
the screws and rawplugs supplied A.
3. The siren body can then be snapped into place on
to the back cover and secured using the screw at
the base.
* Please note that this siren
can also be used
free standing.
Connection to the alarm unit
1. Remove the screw at the base of the alarm unit.
2. Remove the back plate and connect the mini jack
plug at the end of the siren cable into the alarm unit
socket B.
NOTE: Please connect the Remote siren unit to the
main alarm unit before fitting batteries, as the
siren will sound until it is connected.
Battery installation
1. The battery compartment is accessed from the rear of
the alarm unit by removing the screw from the base
and lifting the back cover C.
2. Insert four (4) ‘AA’ size batteries (not included)
following the polarity D. When the last battery is
inserted the siren will beep very loudly to indicate that
the batteries are installed properly.
3. Replace the back cover and fix with screw.
The Battery Low LED will light when the batteries need
replacing.
Operation
Once the alarm has been activated by motion the siren
will sound, so increasing the effectiveness of the alarm.
If the cable connecting the siren and the alarm is
disconnected or cut, the siren will sound instantly, until it
is re-connected or the batteries removed.
Care and maintenance
To clean the case, simply use a soft slightly damp cloth
with water and wipe dry immediately.
CAUTION: Never use chemicals to clean the case, as they
may cause damage to the plastic and cause the alarm not
to function.
www.xenasecurity.com
061107
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Xena XA301 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Xena XA301 in the language / languages: English as an attachment in your email.
The manual is 0,14 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
