Manual Xavax 111913 TimeControl II (page 4 of 8) (English, German, Dutch, French, Spanish)

608039

Zoom out

Zoom in

1/8

Operating Instruction

Mechanical Timer »TimeControl II«

1. Programming the on and off times

To program the on and off times, push the white

tabs down according to the desired time. One tab

corresponds to fteen minutes.

If a longer time period is required, more tabs

(increments of fteen minutes) must be pushed

down.

2. Setting the current time

Turn the time dial clockwise until the arrow on the

inner ring of the dial points to the current time.

3. Connecting the timer switch to the mains,

connecting electrical devices to the timer switch

Insert the timer switch’s plug into a 230 V socket with

earth contact. Then insert the mains plug of the elec-

trical device to be switched into the timer’s socket

with earth contact. The main switch of the device to

be controlled must be in the “On” position.

4. Switching on/off manually

The red on/off switch on the right side of the timer

makes it possible for the user to switch the device on

permanently. If the switch is put in the “I” position,

then the timer is switched on permanently (the tab

setting “Off” is ignored and the clock continues

operating).

As soon as the switch has been put back in the “Off”

position (clock symbol), the standard programme

continues.

5. Technical specications

– 230 V~ / 50 Hz

– 16 A ohmic load; 2 A inductive load

(motorised devices)

– 24-hour timer switch range

(in 15 min. increments)

6. Safety notes

– Never connect the timer switch to an extension

cable or adapter. Only plug it directly into the

socket, otherwise it can overheat.

– Disconnect from the mains before cleaning the

device.

– Clean the device using only a dry, lint-free cloth.

– No rotating devices may be plugged into the timer

switch.

– The device is not protected against drops or

splashes of water.

– Do not let the product come into contact with rain,

moisture or other liquids to avoid damaging the

device and to prevent injuries due to short circuits.

– Only connect the device to a mains socket that

has been approved for the device.

–

The mains socket must always be easily accessible.

– Do not subject batteries to excessive heat,

sunlight, re or similar.

– Never use or open a defective device.

– Repair work may only be conducted by an

authorized specialist.

As with all electronic devices, keep the device out of

the reach of children.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xavax 111913 TimeControl II in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xavax 111913 TimeControl II Manual

Product: