139400
13
Zoom out
Zoom in
Previous page
1/14
Next page
25
24
If DVD have problem
When play DVD Disc, DVD No SOUND
1. Check Volume switch and change to bigger.
2. When using earphone for listening, check VOLUME switch to see whether it is at mini
position.
When play TV function, TV not sound
Please check that SOUND setting in SYSTEM of Main Menu (TV function), and change that
setting to your country system.
Without Image after open power
1. Check the player to see whether open power or power connecter.
2. When play DVD disc, DVD disc can be read or not.
3. When connecting with TV check TV function to see whether it is be set correctly.
Can not read USB
1. Check whether there is one disc inside the disc house, if yes; please take out that DVD
disc.
2. Check USB device, please connect again.
Image rolling or not Color (when you play DVD)
Color system does not match with VIDEO system. Please choose suitable color system.
You could go to SYSTEM SETUP submenu by DVD SETUP key on remoter, and change that
TV SYSTEM to PAL, NTSC or AUTO.
Do not play Disc
1. Incorrect disc position in the player. Please put disc again.
2. Discs printing side should be upside.
3. There is dust on the disc, clean disc.
Remote Controller does not work
1. Move any objects between the remote controller and the DVD player.
2. Point the remote controller to the remote receiving window.
3. Please change to new battery if it is short of power.
Battery do not discharge
1. Please check whether the battery is connected well.
2. If there is power in the battery, it still does not discharge after connecting, please use
power adapter to power on the unit, and use CHARGE key on the remote controller to
charge the battery (take off power adapter from the unit after charging LED is on). Then
switch on power again, it should be ok to use battery to power on the unit now.
Specifications
Laser wave length 650 NM/780 NM
Video system PAL/AUTO/NTSC
Audio response 20 HZ  20 KHZ
Audio
85 dB
Audio distortion + noise
-70 dB
Channel insulation
75 dB
Dynamic range
85 dB
Audio-output (analog audio) Output: 1 V, load impedence: 10 kW
Video-output Output: 1 Vpp, load impedance 75 W
Power adapter Input: AC 100  240 V; output: 12 V, 2.5 A
Accepted working 0
40° C
DVD
Power consumption < 20 W
Screen
9.2" Grade A TFT LCD
Aspect Ratio 16:9
Active Areal (W x H) 203 x 123 (mm)
Panel
Display resolution 800*480 RGB
Bandwidth 6MHz, 7MHz & 8MHz
Input Level -78
-20 dBm
Tuner
Input Impedance 75
W
Demodulation QPSK, QAM16, QAM64
Wave Type COFDM(Coded Orthogonal Frequency Division)
Mode 2K, 4K, 8K
Guard Interval 1/4, 1/8, 1/16, 1/32
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for X4-Tech titan 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of X4-Tech titan 9 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info