584860
4
Zoom out
Zoom in
Previous page
1/7
Next page
P. 5 P. 6
Controlling RoboMe™ Roam mode
To turn, the robot will spin on the spot until the button is released. Therefore, the LEFT arrow button will
make it move counter-clockwise and the RIGHT button will make it move clockwise, regardless of the
direction the robot faces.
Obstacle and Edge Detection
As RoboMe™ moves around, it will detect obstacles in range directly in front of it. Upon detection, it will
stop and make a sound. It will do the same when it detects an edge. The robot can see highly reflective
surfaces, such as white walls and floors or mirrors and might perceive them to be an edge from which it
can fall.
NOTE: The robot cannot detect obstacles or edges to the side or behind it.
Modes
RoboMe™ comes with a few modes that do not require connection to a smart device and app.
Demo Mode
RoboMe™ has two demo routines. To activate a demo, point the remote controller at the robot and press
the DEMO button. To stop, press any button on the remote controller.
NOTE: RoboMe™ moves around during demo routines. Ensure the surrounding area is free from obstacles and edges.
Guard Mode
In Guard Mode, RoboMe™ will scan the environment directly in front of it, up to about 3 feet (1 meter)
away. The robot will sound an alarm if it detects movement of a large person or object within that range.
NOTE: If you give RoboMe™ other commands while in Guard Mode, the robot will exit Guard Mode.
To activate Guard Mode:
1. Press the GUARD button on the remote controller.
2. The robot will perform a scan of the immediate environment about 3 feet (1 meter) in front of it.
3. RoboMe™ will make different comments to show it is scanning the area. If RoboMe™ detects any
movements, it will sound an alarm.
4. After about 30 minutes the robot will exit Guard Mode and wait for a command. If you do not enter a
command within about five minutes, it will enter Standby Mode.
5. To exit Guard Mode, press the GUARD button on the remote controller or give another command.
Roam Mode
In Roam Mode, RoboMe™ explores the environment without your commands, commentating and detecting
obstacles and edges along the way. To enter Roam Mode, press the ROAM button on the remote controller.
After approximately ten minutes, RoboMe™ will exit Roam Mode. If you do not enter a command within
about five minutes, it will enter Standby Mode. To exit Roam Mode before this, give another command.
Standby Mode
RoboMe™ is equipped with a Standby Mode. If you do not interact with it for approximately 5 minutes,
the robot will make a comment and enter Standby Mode.
During Standby Mode both object and edge detection will function but the robot’s eye and
mouth LEDs switch off. The mood indicator LED fades to white and pulses more slowly.
To wake RoboMe™ from Standby Mode, press any button on the Remote Controller or activate any of
its sensors.
Sleep Mode
If RoboMe™ is left for approximately 35 minutes more (approximately 40 minutes altogether) it will enter
Sleep Mode after making a comment. The mood indicator LED will turn off along with the object and edge
sensors. To wake RoboMe™ from Sleep Mode, turn it OFF and then ON again using the power switch
located on the underside.
NOTE: If you are done playing with RoboMe™, turn it off using the power switch located on the underside.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WowWee 0810 RoboMe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WowWee 0810 RoboMe in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of WowWee 0810 RoboMe

WowWee 0810 RoboMe User Manual - German - 12 pages

WowWee 0810 RoboMe User Manual - French - 12 pages

WowWee 0810 RoboMe User Manual - Spanish - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info