673232
5
Zoom out
Zoom in
Previous page
1/64
Next page
5
Lithium-Ion Cordless Impact Driver EN
1. FORWARD/ REVERSE ROTATION
CONTROL
2. SOFT GRIP HANDLE
3. BATTERY PACK RELEASE BUTTON
4. BATTERY PACK*
5. ON/OFF SWITCH WITH VARIABLE SPEED
CONTROL
6. LED LIGHT
7. COLLECT LOCKING SLEEVE
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX290 WX290.1 WX290.9 (2-
designation of machinery, representative of
Cordless impact driver)
WX290 WX290.1 WX290.9
Rated voltage 20V
Max**
Nominal voltage 18V
No-load speed 0-2500/min
Impact rate 0-3000bpm
Max torque 107N.m
Chuck size 1/4”(6.35mm)
Machine weight 1.2kg 0.83kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20volts. Nominal
voltage is 18volts.
NOISE DATA
A weighted sound pressure L
pA
: 76dB(A)
A weighted sound power L
wA
: 87dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection when
sound pressure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 60745:
Typical
weighted
vibration
Vibration emission value a
h
= 9.37m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10°C or less
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
WX290 WX290.1 WX290.9
2.0Ah Battery pack
(WA3551.1)
1 1 /
16V/20V 2A charger
WA3860
1 / /
20V 400mA charger
WA3760
/ 1 /
Screwdriver bit
(50mm PH2)
1 1 1
We recommend that you purchase your accessories
from the same store that sold you the tool.Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WX290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WX290 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info