723918
17
Zoom out
Zoom in
Previous page
1/19
Next page
17
EN
LED light indicator Status Action
Light does not turn on There is no power. Confirm that the power cord is connected properly to the
charger and that the charger is connected to a suitable
power supply.
Green light on Boundary wire is connected
successfully; Landroid
®
is fully
charged.
/
Green light flashing Boundary wire is connected in wrong
direction.
The Boundary Wire isn’t connected.
Check and reverse two ends of boundary wire.
Confirm that there are no breaks in the boundary wire.
Power supply is connected
successfully, while the wire is
connected unsuccessfully.
Check that the Boundary Wire has been connected
correctly to the charging base.
Confirm that there are no breaks in the boundary wire.
Red light on Landroid
®
is auto charging. /
4. Turn on and Test the Installation
Adjust the cutting height to its maximum level (60mm) for the
first mow. Adjust to your preferred grass height after the first cut.
Place your Landroid
®
inside the working area, a few meters
away from the charging base. Turn on Landroid
®
. It will travel
the entire boundary wire before returning to charging base.
This allows you to check that the boundary wire is laid out
properly.
Turn the main switch at the rear of Landroid
®
to Position “I”.
Wait until the battery indication light stays green. If Landroid
®
has low battery capacity, the battery indication light will stay
red. Press “ ” button and then press OK” button.
Watch the Landroid
®
as it returns to the charging base and
modify the position of the boundary wire if necessary. When
Landroid
®
successfully returns to the charging base, the
installation has been successfully completed!
NOTE: If the boundary wire is broken during the testing or
you find you need to extend the boundary wire, please refer
to “Joining the Boundary Wire” in Owners Manual for
instructions.
4.1
4.2
This is the exciting part: turn on your Landroid for the first time.
17


Need help? Post your question in this forum.

Forumrules
1

Forum

worx-wr102-si

Reset search

  • Bonjoiur.
    Nous avons une tondeuse worx 102 SI laquel n'a jamais donné total satisfaction mais...
    Actuellemnt elle tond en marche Ar parfois va en Av, ne fais plus la pelouse de façon complete...
    Un des noteur se bloque lorsque actionne celui-ci a la main. Que puis-je faire pour la rementre en ordre.
    Submitted on 19-4-2022 at 07:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR102 SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR102 SI in the language / languages: English as an attachment in your email.

The manual is 15,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR102 SI

Worx WR102 SI User Manual - English - 20 pages

Worx WR102 SI Installation Guide - Dutch - 19 pages

Worx WR102 SI User Manual - Dutch - 21 pages

Worx WR102 SI Installation Guide - French - 19 pages

Worx WR102 SI User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info