723919
19
Zoom out
Zoom in
Previous page
1/20
Next page
Owner’s Manual of Lawn Mowing Robot EN
19
Landroid
®
is starting to have
shorter run-times between
charges.
Something is clogging in the Blade
Disc.
Take off the Blade Disc and clean it
The grass is too high and too thick.
Landroid
®
is shaking heavily.
Check the Blade Disc and blades, remove
debris and foreign objects from the blades
and Blade Disc.
The battery may be exhausted or old. Replace battery.
Landroid
®
is not operating at the
correct time.
The clock is not set to the correct
time.
Set the clock to the correct time by using
App.
Programmed cutting times for
Landroid
®
are not correct.
Change the time settings for the mower to
start and stop.
Landroid
®
cannot correctly dock
with the Charging Base
Environmental influences Restart Landroid
®
.
Poor connection caused by debris on
the Charging Strip.
Clean the Contact Pins located on the
Charging Base and the Charging Strip on
Landroid
®
using a cloth.
The Green light on the Charging
Base turns ON before charging
is complete.
The charging base is overheating, the
battery indication light flashes red.
Place the charging base in a shady area or
wait until the temperature has cooled down.
Landroid
®
runs outside the
boundary wire. Landroid
®
does
not mow an area within a
boundary wire zone. Landroid
®
reverses or rotates erratically
near the boundary wire.
The boundary wire of another
Landroid
®
or another robotic mower is
positioned too closely.
Ensure your Landroid
®
Boundary Wire has at
least 1m of space between the neighboring
boundary wire.
The boundary wire has been installed
with tight corners.
Check the boundary wire to ensure the
corners are smooth.
In wet conditions, the boundary wire
electric signal may leak were wire has
been joined or repaired.
Check boundary wire joints. Insulate to
provide a fully waterproof connection.
There is boundary wire electric signal
leakage due to broken insulation.
Repair damaged boundary wire insulation
with connectors.
The cutting area is larger than the
allowable cutting area for Landroid
®
.
Contact service agent.
Landroid
®
wheels skid or
damage lawn.
Foreign obstacles, such as twigs
and branches may be lodged under
Landroid
®
.
Remove foreign objects from underside of
Landroid
®
.
The lawn is too wet. Wait until lawn has dried.
Landroid
®
exits the boundary
wire due to high speed when
going down a hill.
The Boundary Wire is placed on a
slope steeper than 17% (10°).
Reposition the Boundary Wire away from
slopes that are steeper than 17% (10°).
Please refer installation manual for details.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR101 SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR101 SI in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR101 SI

Worx WR101 SI Installation Guide - English - 19 pages

Worx WR101 SI Installation Guide - Dutch - 19 pages

Worx WR101 SI User Manual - Dutch - 21 pages

Worx WR101 SI Installation Guide - French - 19 pages

Worx WR101 SI User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info