734948
12
Zoom out
Zoom in
Previous page
1/16
Next page
22 23
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
Q1W-SP14-1900A
Q1W-SP14-1900A
+44 (0) 190 472 7501
+44 (0) 190 472 7501
Troubleshooting 8
WARNING
Do not make any attempt to repair the machine yourself. You can put your
life at risk through electrocution, and this can cause damage to the machine
and invalidate your warranty.
The table below is a useful point of reference if malfunctions occur.
Troubleshooting table
Fault Cause Solution
Not functioning
- Power supply
interrupted
- Machine switched off
- Defective components,
e.g. switches, motor
- Check the power connection,
cord and fuse; if necessary, have
them repaired by an electrician
- Activate the ON/OFF switch
- Consult Customer Service
Machine works
with interruptions
- Power cord damaged
- Internal electrical
connection has
comeloose
- ON/OFF switch
defective
- Consult Customer Service
No or minimal
build-up of
pressure
- Air in the system, needs
to be vented
- Operate the machine without the
high-pressure hose connected
until the water emerges clear of
bubbles. Attach the hose again.
- No or inadequate water
intake
- Check / open the intake valve
- Check the intake hose for leaks or
blockages
- Clogged dirt filter - Check and clean the filter
- Spray lance set to low
pressure
- Check the spray lance setting
- Machine draws in air - Check the intake hose for leaks
Place the protective cap onto the threaded connector in order to avoid dirt and
damage.
Wind the power cord onto the cord bracket (4).
Secure the end of the cord with the cord clamp, as shown in figure.
If the machine is not going to be used for a lengthy period of time, empty the
detergent tank and drain the water out of the hoses.
Store the machine upright in a dry, frost-free, well ventilated place, out of the reach
ofchildren.
Transport
Where possible, use the original packaging for transport.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone Q1W-SP14-1900A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone Q1W-SP14-1900A in the language / languages: English as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Workzone Q1W-SP14-1900A

Workzone Q1W-SP14-1900A User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info