724651
15
Zoom out
Zoom in
Previous page
1/18
Next page
AFTER SALES SUPPORTe-mail: help@powertoolsupport.com
1800 909 909 (toll free)MODEL No.: IW36 • 61551 • 07/2018
AFTER SALES SUPPORTe-mail: help@powertoolsupport.com
1800 909 909 (toll free)MODEL No.: IW36 • 61551 • 07/2018
28 29
What your 5 year warranty means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of
the rst 5 years after the date of purchase, we will remedy the problem
as quickly as possible once it has been brought to our attention. In the
unlikely event of such an occurrence, or if you require any information
about the product please contact us via our after sales support services,
details of which can be found in this manual and on the product itself.
After Sales Support TEL: 1800 909 909
Service Support
If you have any issues with the operation of your product, please call us on
1800 909 909 for advice, or email us at help@powertoolsupport.com
Accessories and After Sales Parts
The following is available for purchase by visiting https://help.tools/ or
calling our customer service hotline on: 1800 909 909
1. 61551-BH: Belt Hook
+ Assembly screw
Do I need to charge the battery before use*?
Yes, Some new battery packs are shipped in a low charge condition and must be fully
charged before use. Ensure you follow the charging instructions supplied for both the
ALDI Xnity Battery and Charger purchased for operation of this Impact Wrench
How do I obtain the best life for the battery*?
Follow the charging instructions supplied for both the ALDI Xnity Battery and Charger
purchased for operation of this Impact Wrench, however, it is generally recommended:
- Never allow the battery to run completely empty before recharging. The battery
should be placed on charge whenever the battery is noticeably running down or the
impact wrench no longer performs a task it previously performed.
- Avoid allowing lose items like screws or nails etc. to be stored with battery packs as
these or similar items can short battery packs and cause a re or explosion.
- Always unplug the charger when not in use and store in a dry secure place.
- Avoid charging or storing your battery in high temperatures and ensure the storage
area is dry.
What is the function of the Forward / Reverse selector ?
This selector (2) will allow you to change the direction of the motor while the trigger
switch is not depressed. Drill/driving uses the forward mode. The reverse mode is in-
tended for the removal of screws and assisting to remove jammed drill/driver bits.
How do I adjust the torque?
The level of torque is dependent upon how much pressure is applied to the trigger
switch (5). The further the trigger switch is depressed the faster the socket will rotate and
the lighter it is depressed, the slower it will rotate.
Controlling the torque allows for better control when using the impact wrench in
specic screwing tasks and assists in preventing over-fastening and over-tightening.
FAQ/Troubleshooting
* Battery and Charger not included with this product
For further inquiries or issues associated with your Impact Wrench, call our
Customer Service on 1800 909 909 or email us at help@powertoolsupport.com
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone IW36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone IW36 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info