575852
13
Zoom out
Zoom in
Previous page
1/17
Next page
AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
AFTER SALES SUPPORT:
Telephone: 1800 269 981
E-mail: support@eurocentra.com.au
24 25
Volume addition in the volume mode:
Press the MODE button in order to store the calculated volume
from the first measurement – the M+“ symbol appears in the display;
Press the MODE button in order to delete the currently displayed
data – now the second measurement and calculation can be carried
out (follow steps 1 and 3 under the “Volume section).
After obtaining the calculated second volume, press the +/=
button, in order to switch into the addition mode. The “+“ symbol
will appear in the display. A double beeping tone will sound;
Add the content of the memory to the last measurement result:
Keep +/= button pressed down until a double beeping tone
sounds. “M+” will disappear from the display, only the value from the
memory will now appear in the lower row of the display.
The width symbol “W“ in the display flashes to indicate the next
measurement to be carried out. Press the READ button in order to
measure the width, the result appears in the upper section of the
display. (Step 2);
The height symbol “H“ in the display flashes and indicates the next
measurement to be carried out. Press the READ button in order to
measure the height, the result appears in the upper section of the
display. (Step 3);
The repeated pressing of the READ button switches back and forth
in the upper section of the display between the length, width and
height;
Press the MODE button in order to delete the data from the display
now, a new volume calculation can be carried out;
in order to switch into the measurement mode, press the MODE
button again.
Tips:
With the individual pressing of the MODE button, you can switch back
and forth between the length, area and volume. If data is available on
the display, the pressing of the MODE button will delete the current
data – the mode remains unchanged.
Operation Operation
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone GT-UDM-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone GT-UDM-02 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Workzone GT-UDM-02

Workzone GT-UDM-02 User Manual - German - 17 pages

Workzone GT-UDM-02 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info