809348
9
Zoom out
Zoom in
Previous page
1/12
Next page
Operation
9
MT20 Wired Timer – 6 720 882 947 (2019/07)
7.2 Setting the time
NOTICE:
Risk of damage to mechanical clock
The unit may be damaged if you rotate the outer ring
anticlockwise.
Only rotate the outer ring clockwise (direction shown on
clock face).
Rotate outer ring [1] in direction of arrow (clockwise) until
the 24 hour pointer [2] displays the correct time.
Fig. 9 Setting the current time
7.3 Setting the heating times
Each tappet represents 15 minutes.
Using the 1 to 24 hour marks [1] on the outer ring to set the
tappets [2].
Move the tappet inwards [3] for ON periods.
Move the tappet outwards [4] for OFF periods.
Fig. 10 Setting the heating times
Table 4 Times
7.4 Operating mode selection
Move the selector switch [1] to set the required mode:
OFF
Constant off (no heating)
Timed
Switches between and uses both ON and OFF periods
according to the tappets.
•ON
Constant on (available for a heating demand, in-
conjunction with a room thermostat)
Fig. 11 Operating mode selection
0010017954-001
1
=
2
03:15
0010017956-001
2
Heating ON
Heating OFF
3
4
1
Operation Pre-set User defined times
ON 06:30
OFF 08:30
ON 16:30
OFF 22:30
ON -
OFF -
ON -
OFF -
0010017957-001
Constant
ON
Timed
Constant
OFF
1
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch MT20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch MT20 in the language / languages: English as an attachment in your email.

The manual is 3.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info