677712

Wmf BISTRO easy Series 8300 Manual

36
Zoom out
Zoom in
Previous page
1/38
Next page
76
13 HACCP cleaning concept
Dear Customer,
Our aim in providing this customer information is to assist you in complying with the statutory
food hygiene regulations relating to milk beverages as they apply to WMF coffee machines.
The German food hygiene ordinance dated 5
th
August 1997 places a legal obligation on you to
ensure that your customers are not exposed to any health hazards due to consuming foods supplied
by you.
The HACCP (Hazard Analysis Critical Control Points) concept introduced by these regulations
requires you to carry out a hazard analysis of your business. The aim of this analysis is to identify
hazard points relating to food hygiene and remedy them. Monitoring and if necessary testing
procedures have to be established and implemented to this end.
If properly installed, maintained, cared for and cleaned, WMF coffee machines fulfil the
conditions of the above mentioned requirements. If the machine is not properly cared for and
cleaned, dispensing of milk beverages, even from WMF coffee machines, becomes a hazard
point from a food hygiene point of view.
Please therefore bear the following points in mind when planning your HACCP concept:
Disinfect your milk system once a day
It is essential to follow the operating instructions with regard to cleaning the milk dispensing
system. That ensures your system is as sterile as possible at the start of operation.
Start up each time with a fresh pack of cooled long-life milk
Long-life milk in its original packaging is free from harmful germs as a rule. Never start
working with a milk pack which has already been opened. When opening the fresh milk pack,
it is important to ensure absolute cleanliness. Otherwise dirty hands, scissors or knives can
introduce germs as soon as the pack is opened.
Keep the milk cool
At the start of operation the milk should be at fridge temperature (approximately 6 – 8 °C).
The warmer the milk, the faster germs can multiply.
- Cooling is not necessary, provided the pre-cooled fresh milk is used up within 3 hours
maximum (equivalent to about 15 cappuccinos from 1 litre of milk, depending on the
machine setting). The milk does not warm up to a critical level during this time.
- If your milk consumption is less than this, the milk should be cooled while in use. WMF AG
offers various options for this purpose. The same principle applies however, the milk must
be pre-cooled. Cooling warm milk takes some time and should therefore be done before the
milk is opened. Always keep a “spare” unopened pack of milk in the WMF cooler or take a
fresh pack from the cold storage room or fridge.
- If it is not possible for you to cool the milk during operation and your milk consumption is
very low, intermediate cleaning should be carried out at least every time the milk pack is
changed (see operating instructions).
… 36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf BISTRO easy Series 8300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf BISTRO easy Series 8300 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info