Cleaning
– Do not use an alcoholic-base or solvent agent to clean the device
– Clean the device with a soft and dry cloth
– The dirt on the cu can be cleaned by a moisten cloth and soap
– Do not ush the device and cu with much water
– Do not dismantle the device or disconnect the cu or try to repair
by yourself. If any problem happens, refer to the distributor
– Do not operate the device under severe environment of extreme
temperature or humidity, or direct sunshine
– Do not shake the unit violently
– Do not submerge the device or any of the components in water
– Do not let the device under strong shocks, such as dropping
the unit on the oor
Storage
– If you are not using the device for an extended period, remove
the alkaline cells from the aluminium tube for storage.
– Store the device and the components in a clean and safe location
Maintenance
If you can’t x the problems using the troubleshooting instructions ,
request service from your dealer. Manufacturer will make available
on requested circuit diagrams, component part lists, descriptions,
calibration instructions, or other information that will assist
manufacturer’s sta or authorized representative for repair.
It is generally recommended to have the device inspected every
2 years, to ensure proper functioning and accuracy.
AFTER USE
