774439
21
Zoom out
Zoom in
Previous page
1/23
Next page
P. 6 7P.P. 6 77P.
Overheating safety mechanism
The safety mechanism will cut off the power as soon as the heating element
becomes too hot. This is to avoid problems with overheating.
If this should happen:
- Pull the plug out of the mains socket.
- Leave the fan heater to cool for ten minutes.
- Ensure that the heater is positioned in accordance with instructions.
- Check that no dust or other obstacles are blocking the flow of air.
- Clean the grille with a hoover if necessary.
Cleaning
- Turn the switch to "0". Allow the fan heater to cool down.
- Pull the plug out of the mains socket.
- Clean the outside of the fan heater with a damp cloth.
- Never allow water to drip into the fan heater.
- Do not immerse the fan heater in water.
- Clean the air openings regularly with a hoover as required.
Installing the fan heater
Position the fan heater so that incoming and outgoing air is not hindered in any
way. Choose a safe place to avoid the risk of fire
(see also the section entitled "IMPORTANT"). See also the installation instructions
for the specific unit later in this user manual.
IMPORTANT ADDENDUM TO USER MANUAL
(FOR FILTER + FILTER HOLDER)
NB: The filter that comes with the appliance should be used to prevent dust from
collecting on the heater's heating element.
The filter should be cleaned regularly (we suggest checking it once a month):
clean the filter using a hoover; alternatively, the filter can be washed in a
dishwasher on the lowest temperature setting.
Maintenance of the filter is extremely important. If the filter is not cleaned
regularly, dust may affect the flow of air and cause the temperature switch inside
the product to switch off when the unit is operating normally.
Topple switch for FH-1 model
This product features an additional safety device for your protection.
The fan heater will disconnect automatically if the appliance leans more
than 30° forward or backward.
The appliance will switch on again automatically when it is returned to an upright position.
Starting the appliance
You have the choice of several functions:
0-off
Off (both fan and heating element are switched off).
• 1000W
Hot air.
• 2000W
Very hot air.
*
No frost
"No frost" function:
The fan heater starts heating automatically when the temperature of the room
drops below +5 °C.
This appliance conforms to the basic requirements in the EU directive.
EngelskEngelskEnglish
English
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wilfa FH-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wilfa FH-T in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info