Manual Wilfa BL-2 (page 14 of 15) (English, Danish, Swedish, Norwegian, Finnish)

774225

Zoom out

Zoom in

1/15

9. Do not let cord hang over edge of table or counter or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. Always attach plug to appliance first, then plug cord into wall outlet. To

disconnect, turn any control to OFF position, then remove plug from wall outlet.

12. Oversized foods or metal utensils must not be inserted in the appliance as they

may cause a fire or risk of electrical shock.

13. A fire may occur if the appliance is covered or touching flammable material

including curtains, draperies, walls and the like when in operation.

14. Do not clean with metal scouring pads. Pieces can break off the pad and touch

electrical parts, involving a risk of electrical shock.

15. Extreme caution should be exercised when using containers constructed of other

material other than metal or glass.

16. Do not store any materials other than manufacturers recommended accessories

in this unit when not in use.

17. Do not place any of the following materials inside the unit: Paper, cardboard,

plastic and the like.

Before first use…………………………………….

z All parts of the blender are to be thoroughly cleaned before being used for the

first time.

z Take out the required length of cable from the cable tidy on the base of the

blender and connect the device to the mains supply.

Assembling the Jar:

1. Put the rubber sealing ring (5) on the inner edge of the blade unit (6).

2. Put the blade unit with sealing ring into the cup base (7).

3. Inset the safety ring (4) on the bottom of jar first, then Insert the assembled cup

base onto the bottom of the jar and secure tightly.

4. Mount the jar(3) onto the cup base unit and tune the cup base unit, and turn

clockwise until jar locks into place.

5. Mount the Measure Cup (1) onto the Lid (2).

6. Secure the Lid onto Jar and press down.

Inserting the Jar:

1. Make sure that the blender is switched off (Switch in the ‘0’ setting).

2. Place the jar assembly (9) on to the motor base (8) and press down until securely

engaged.

How to Use

1. Place the foodstuff you wish to process into the jar.

2. Put the lid on the jar and close securely. Place the measuring cap into the hole in

the lid and turn clockwise to lock.

3. Switch on the motor base:

4. NB: Operate the motor for a maximum of 60 seconds or alternating 60

seconds on, then 60 seconds off to prevent overheating or consequent

damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wilfa BL-2 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wilfa BL-2 Manual

Product: