727527
25
Zoom out
Zoom in
Previous page
1/26
Next page
25
Troubleshooting Tips
Unsatisfactory
washing result
Problem Possible Causes What To Do
The dishes are not clean
The dishes were not loaded cor-
rectly.
See notes in " Loading the Dishwasher
Baskets ".
The program was not long
enough.
Select a more intensive program. See"
Wash Cycle Table ".
Not enough detergent was dis-
pensed
Use more detergent, or change your deter-
gent.
Item are blocking the path of spray
arms.
Rearrange the items so that the spray can
rotate freely.
The filter combination in the base
of wash cabinet is not clean or
is not correctly fitted. This may
cause the spray arm jets to get
blocked.
Clean and/or fit the filter combination cor-
rectly.
Clean the spray arm jets. See "Cleaning
the Spray Arms".
Cloudiness on glassware
Combination of soft water and too
much detergent.
Use less detergent if you have soft water
and select a shortest cycle to wash the
glassware and to get them clean.
Black or gray marks on dishes
Aluminum utensils have rubbed
against dishes.
Use a mild abrasive cleaner to eliminate
those marks.
Detergent left in dispenser cups Dishes block detergent cups. Re-loading the dishes properly.
Unsatisfactory
drying result
Problem
Possible Causes What To Do
Improper loading Load the dishwasher as suggested in the
The dishes are not drying
Too little rinse aid
Increase the amount of rinse aid/ refill the
rinse aid dispenser.
Dishes are removed too soon.
Do not empty your dishwasher immediately
after washing. Open the door slightly so
that the steam can escape. Begin unloading
the dishwasher only once t he dishes are
barely warm to the touch. Empty the low
basket first. This prevents water form drop-
ping off dishes in the upper basket.
Wrong program selection
In short program the washing temperature
is lower. This also lowers cleaning perfor-
mance. Choose a program with a long
washing time.
Using silverware with a low-
quality coating
Water drainage is more difficult with these
items. Silverware or dishes of this type are
not suitable for washing in the dishwasher.
ERROR CODES
When some malfunctions come on, the appliance will display error codes to warn you:
Codes Meaning Possible Causes
E1 Longer inlet time. Faucets is not opened, or water intake is restricted, or water
pressure is too low.
E3 Not reaching required temperature. Malfunction of heating element
E4 Overflow. Some element of dishwasher leaks
Ed Failure of communication between main PCB with TFT PCB Open circuit or break of wiring for the communication
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter CDW-6831WES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter CDW-6831WES in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info