643511
18
Zoom out
Zoom in
Previous page
1/20
Next page
18
The unit is set to low fan speed.
Set the unit to a higher fan speed.
The unit has worked for a long
time, but the room is not cold
enough
Windows or doors are open.
There are too many people in the room.
There is direct sunshine into the room.
The room is a kitchen or with many heat-
producing appliances
There is a server in the room.
The room is too large.
Close all windows and doors.
You may need additional cooling or another air conditioner.
Close curtains or blinds and try to minimize the amount of direct sunlight
into the room.
You may need additional cooling or another air conditioner.
You may need additional cooling or another air conditioner.
You may need additional cooling or another air conditioner.
The unit is very noisy The unit is not level.
The surface underneath the unit is uneven.
Low power voltage.
Make sure the unit is on hard, level and stable surface.
Move the unit to a location with a level and hard floor.
Make sure the wall outlet and support the required power consumption
of the air conditioner and do not use an extension cord.
The unit leaks water The unit is tilted or not leveled
The water tank is full.
Make use the unit is leveled.
Drain water from the drain plug at the back of the air conditioner.
Fan speed cannot be changed Fan speed differences are not very noticeable
The fan speed difference is not very noticeable when the compressor is
on. Try setting the unit to Fan only mode, you should be able to hear the
difference between high and low fan speed settings.
F1 error message Air filter needs to be clean. Clean the air filer.
Once the filter is installed, press and hold the power button for 10
seconds to reset the F1 code. A beep sound will indicate a
successful reset process.
*The F1 message may not go away immediately. If the unit is cooling
properly, the F1 message does not affect the performance of the air
conditioner.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter ARC-13PG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-13PG in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info