484218
2
Zoom out
Zoom in
Previous page
1/25
Next page
Witheachwashcycle.
Compartment
For progr ammes with pre-wash only.
(Follow the user instructions!)
Electric indicator on control panel (if pro vided).
Check the rinse aid level
(On models w ith water softener system only.)
Elec tric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwashe r has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Close the door, t urn on the water tap and press the Start/reset button. The machine will start working
after about 10 s econds.
Running the dishw asher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the deter gent disp en ser
Warning: wait a few minutes (about 15 minutes) before unloa ding the dishwasher to avoid handling
the dishes and utens ils while they a re still hot and more s usceptible to break .
The y will a lso dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then l oad the baskets. Refer to the dishwasher loading instructions.
Press the Programme button until the sele cted programme lights up.
( See the section entitled Operationg instruction )“”
When th e working cycle has finished, the buzzer of the
dishwasher wi ll soun d 8 tim es, then stop.
Turn off the appliance using the ON/OFF button.
If the appliance is switched
off during a wash cycle.
Open t he do or carefull y.
Hot st eam may esc ape
when the door isopened!
If the appliance is switched off during a wash cycle, wh en switched
on again, please re-select th e wash ing cycle and operate th e dishwasher
according to the original Power-on state ).
Switch on the appliance Press the On/Off button to switch on th e applian c e, Open the door.
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dish washer will start r unning again after 10 sec onds.
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. O therwise the detergent
m ay have already be en released and the water already drained. If this is th e case, the detergent
dispenser must be refilled.
2. Press the Start/Reset button for more than 3 seconds to cancel the running programme .
3. Selec t a new programme.
4. Restart the dishwash er.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight DW1260SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight DW1260SA in the language / languages: English as an attachment in your email.

The manual is 4,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info