484232

White Knight 86AW Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
If P9 (variable time program) has been selected press the coloured Start button. A default of 120 minutes
will appear in the display window. Use the (-) or (+) buttons to adjust the drying time for your laundry
from 10 minutes up to 180 minutes. Holding the button down will rapidly change the time selected.
Select anti-crease function if required.
Press the coloured Start button to commence the drying cycle. The drum will begin rotating and will stop
automatically when your clothes are dry or the timed cycle has finished. An audible alert will sound to
indicate that the drying cycle has finished.
If you have selected the anti-crease function, the drum will continue to turn periodically for up to 8 hours
or until the dryer is stopped by opening the dryer door or by disconnecting from the mains.
If the door is opened during a drying cycle the dryer will stop. To restart, close the door, press the
Activate button then press the coloured Start button.
There is an automatic 12 minute cool down period at the end of each cycle, during which the heater is
switched off and the green cool indicator is on. This helps to minimize creasing, and must always be
used fully to avoid the risk of fire.
DELAY START
To use the Delay Start feature press the Delay Start button before pressing the Start button. The Delay
Start display will show 1 hour of delay time. Repeated pressing, or holding down, of the Delay Start
button will increase the amount of delay time to a maximum of 9 hours. To cancel Delay Start, press the
Reset button. To start the delay period press Start. The delay time will start to count down in the display
window. To cancel Delay Start once the countdown has started, de-power the machine by opening the
dryer door.
NEVER SWITCH THE DRYER OFF AND LEAVE A HOT LOAD IN THE DRUM DUE TO THE
RISK OF FIRE.
ALWAYS CLEAN THE FILTER AFTER EACH USE. Failure to do so could cause the safety cut-
out to operate.
ANY PROBLEMS
If the clothes are not dry after normal drying time:
- Check that you used the correct heat setting.
- Check that the lint filter has been cleaned. A blocked filter will restrict the airflow.
- Check that your dryer is heating – the area below the door should feel warm to the touch after the first
10-15 minutes of its programme.
- Pull the filter upwards and away from the appliance.
- Remove any threads or fluff by hand or with a soft brush.
- Slide the filter back.
- Wash the filter occasionally in detergent solution using a soft brush
to remove small particles.
- If your filter becomes damaged, replace it to ensure no damage is
caused to the dryer.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight 86AW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight 86AW in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info