702377
4
Zoom out
Zoom in
Previous page
1/5
Next page
6. Once you have selected the SSID , password will required . Use the
SAID (see “Before starting the set up process” ) as a password (i.e..
444441ABCD).
Note: This password is case sensitive. Then connect to the
network.
7. Wait until your device conrm to be connected to appliance WiFi
network.
8. Open a web browser. If nothing appears, type “192.168.10.1” in the
address bar (URL) and press Enter. The browser display a SMART
web page. It is the conguration page of the WiFi radio of your
appliance.
9. In the drop down list of available networks, select the name of
your home wireless network.
10. If home wireless network is hidden, select “Other” (-> ) and
manually enter its name (SSID) and security protocol.
11. Enter password for your home wireless network, if required, and
submit. Remember this kind of password is case sensitive.
12. Click the button “
” to submit and wait for few seconds.
13. The wi icon on the appliance should stop blinking and turn ON
permanently once conected. Otherwise, disconnect and reconnect
appliance to main power and repeat the procedure.
14. The setup process is complete.
1.3 SWITCH OFF / ON WIFI FEATURE
To switch o the connection of the appliance to the wi network, press
and hold for 5 seconds the connectivity button on the appliance (one
acoustical feedback is played). The wi icon on the appliance display
should turn o.
To turn on again the wi connection on the appliance, press the wi
button on the remote control.
When appliance is provisioned, user can disengage this function and
disconnect it from the wi network by pressing and hold for 10 seconds
the connectivity button on the appliance (two acoustical feedbacks are
played, one after 5 seconds, one after 10 seconds).
The wi icon on the appliance display should turn o.
To connect the appliance again to the home wi network follow the
procedure on paragraph “provisioning”.
1.4 REMOTE CONTROL / DAILY USE
This feature may be implemented depending from the appliance type.
1. Make sure the Your router is ON and connected to the Internet.
2. Make sure the WiFi Connection State indicator status on the
product’s display is solid.
3. Use the Whirpool App to control the appliance by remote, so You
can:
check your appliance and activate options also when you are out
of home.
access additional functions, for instance the smart energy mode.
optimize energy consumptions leveraging for example the best
energy tari.
access further information on best use of your appliance.
receive feedback about appliance status in case of alarms.
1.5 QUICK IDENTIFICATION OF APPLIANCE CONNECTION STATE
If WiFi Connection State indicator on appliance display blinks fast,
then Appliance is searching connection to router. If it blinks slowly,
then Appliance is connected to router but it is not able to connect to
internet (for example ADSL not working) some appliance type doesn’t
support slow blinking but only blinking feature.
If solid ON Appliance is connected to internet and to the Whirlpool’s
cloud system.
1.6 WIFI FAQS
Which WiFi protocols are supported?
The WiFi adapter installed supports WiFi b/g/n for European countries.
Which settings need to be congured in the router software?
The following router settings are required: 2.4 GHz enabled, WiFi b/g/n,
DHCP and NAT activated.
Which Version of WPS is supported?
WPS 2.0 or higher. Check the router documentation.
Are there any dierences between using a smartphone (or tablet)
with Android or iOS?
You can use whichever operating system you prefer, it makes no
dierence.
Can I use mobile 3G tethering instead of a router?
Yes, but cloud services are designed for permanently connected
devices.
How can I check whether my home Internet connection is working
and wireless functionality is enabled?
You can search for your network on your smart device. Disable any
other data connections before trying.
How can I check whether the appliance is connected to my home
wireless network?
Access your router conguration (see router manual) and check
whether the appliance’s MAC address is listed on wireless connected
devices page.
Where can I nd the appliance’s MAC address?
Look on your appliance:
There is a label showing the SAID and MAC addresses.
The MAC address consists of a combination of numbers and letters
starting with “88:e7”.
How can I check whether the appliance’s wireless functionality is
enabled?
Use your smart device and the 6th Sense Live app to check whether the
appliance network is visible and connected to the cloud.
Is there anything that can prevent the signal reaching the
appliance?
Check that the devices you have connected are not using up all the
available bandwidth.
Make sure that your WiFi-enabled devices do not exceed the maximum
number permitted by the router.
How far should the router be from the appliance?
Normally the WiFi signal is strong enough to cover a couple of rooms,
but this very much depends on the material the walls are made of. You
can check the signal strength by placing your smart device next to the
appliance.
What can I do if my wireless connection does not reach the
appliance?
You can use specic devices to extend your home WiFi coverage, such
as access points, WiFi repeaters and power line bridges (not provided
with appliance).
How can I nd out the name of and password for my wireless
network?
See the router documentation. There is usually a sticker on the router
showing the information you need to reach the device setup page
using a connected device.
What can I do if my router is using the neighbourhood WiFi
channel?
Force the router to use your home WiFi channel.
What can I do if the Connection State indicator continues to blink
slowly and never lits solid on or unable to make a stable provision
to home router?
The appliance might have successfully connected to the router, but
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool WHVS90F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool WHVS90F in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool WHVS90F

Whirlpool WHVS90F User Manual - German - 5 pages

Whirlpool WHVS90F User Manual - Dutch - 5 pages

Whirlpool WHVS90F User Manual - French - 5 pages

Whirlpool WHVS90F User Manual - Spanish - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info