The Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is switched on.
Fan deactivation/reactivation: Fan is active by default.
To deactivate/reactivate the fan follow the process described below:
- Push the Light Button as indicated in picture 2: the light will switch off;
- Without releasing the Light button, keep pressed the Temperature button too as indicated in picture 3: the light will blink once if the fan has been deactivated (OFF) , or it will blink
three times if the fan has been activated (ON).
Note: Deactivation of the fan switches off function 6th Sense Fresh Control in the fridge.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs light, allowing a
better lightning as well as a very low energy consumption.
If the LED light system does not work, please contact the Service to replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more then 8 minutes the
light will be automatically switched off.
Indicator LEDs to display the current temperature setpoint or the Fast Cooling
function.
FAST COOLING function
The use of the Fast Cooling function is recommended:
- to increase the cooling capacity of the refrigerator compartment
when placing a very high quantity of food within it,
To activate the Fast Cooling function, press the Temperature
button cyclically on the control panel till all the 3 LEDs blink and
remain on.
Led ONLed OFFLed ONLed OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
The function is automatically deactivated after 6 hours and return
to previous selected set point. The function can be manually
deactivated by press Temperature button on the control panel.
ON/STANDBY button.
TEMPERATURE button
ON/STANDBY function
To put the product in Stand-by,
press and hold the On/Standby
button for 3 seconds. All the
temperature indicators turn off.
Press again to reactivate the
appliance. (see the Instructions
for Use)
TEMPERATURE setting
Press the Temperature button on the control panel to adjust
the temperature from the warmest through the lower to the
coldest level.
Pressing the Temperature button, the temperature setting will
change cyclically.
At first plug-in of appliance temperature setpoint is present at
medium position (factory setting).
Following table shows temperature setpoints:
Note: Displayed set points correspond to the average
temperature throughout the whole refrigerator.
Led ONLed OFFLed ONLed OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Fast Cooling
1. Fan*
2.Electronic control panel / light unit
3.Multi-flow cold air area*
4.Bottle rack *
5. Sensor cover
6.Area shelves
7.Rating plate with commercial name
8.Fruits and vegetables crisper
9.Crisper divider*
10.Door reversibility kit*
11.Egg tray*
12.Bottle separator*
13.Door trays
14.Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
fridge compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary from
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool SW8AM2QX at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool SW8AM2QX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.
The manual is 5,38 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.