To put the product in Stand-by, press and hold the
button for 3 seconds. All the icons turn off except
On/Standby indicator . To reactivate the appliance
press once (briefly) this button. (see the Instructions
for Use)
6TH SENSE FRESH CONTROL
This function automatically works to ensure the optimal conditions to preserve the
stored food. To deactivate the “6th Sense Fresh Control”, press and hold Fast Cool
and Stop Alarm buttons at the same time for 3 seconds until an audible signal
sounds and “6th Sense Fresh Control” icon turns off as confirmation that the feature
has been deactivated. To reactivate this function repeat the same procedure.
Note: Deactivation of the function switch-off the FAN in the fridge.
FAN
The Fan improves temperature distribution inside the
product, allowing better preservation of stored food.
By default, the fan is switched on. To switch off the
FAN press and hold Fast Cool and Stop alarm
buttons at the same time for 3 seconds until an audible
signal sounds and “6th Sense Fresh Control” icon
will turn off as confirmation that the fan has been
switched off. To switch on the FAN repeat the same
procedure. As a confirmation audible signal sounds and
the icon turns on.
Note: Reasons why switch off the fan look for
“ENERGY-SAVING TIPS” in the Instructions for Use.
FAST COOL button
Using Fast Cool function it is possible to increase the cooling
capacity in the refrigerator compartment. The use of this function
is recommended when placing a very high quantity of food in
the refrigerator compartment. Press the Fast Cool button
to activate Fast Cool function. When activated, the Fast Cool
indicator turns on. The function is automatically disabled after 6
hours, or can be manually disabled by pressing Fast Cool button
again.
ALARMS TABLE
ALARM TYPESignalCauseCure
Door open alarm
The acoustical alarm is activated and the Alarm Indicator
blinks.
The door has remained open for more than 2 minutes.Close the door or press the Stop Alarm to mute the acoustical alarm.
Malfunction.The letter “F” blinks on the display (°C).Product malfunction.Contact the After-sales Service.
2
5
6
7
9
10
13
16
14
17
8
11
12
X
X
3
4
18
19
15
1
1.Control panel
2.Main LED ‘s lighting*
3. Fan
4. Optional lighting in Multi-flow*
5. Shelf divider*
6. Multi-flow cold air area*
7. Bottle rack *
8. Sensor cover
9. Zero degrees drawer*
10. Rating plate with commercial name
11. Cooler compartment(best for meat and fish)*
12. Area shelves
13. Fruits and vegetables crisper
14. Crisper divider*
15. Door reversibility kit*
16. Egg tray*
17. Bottle separator*
18. Door trays
19. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance,
wait at least 4-6 hours before placing food into the
appliance. When the appliance is connected to the
power supply, the display lights up and all the icons
appear on the display for approximately 1 second.
The default (factory) values of the fridge compartment
settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two
persons. There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may
vary from model.
ALARM indicator
(see the below Alarms Table)
STOP ALARM button
Press in case of alarm to mute the acoustic alarm.
VACATION button
This function can be activated to reduce the energy consumption of the appliance during a prolonged period of time.
Before activating the feature, all perishable food should be removed from the refrigeration compartment and make sure that the door is closed properly,
since the refrigerator will maintain a suitable temperature to prevent the formation of unpleasant odors (+12°C). To activate/ deactivate press the
Vacation mode button for 3 seconds.
When the function is enabled, the related symbol will light up and the temperature of the refrigerator compartment will be set to a higher setpoint
(the temperature display will show the new temperature setpoint of +12°C). Changing the temperature setpoint will automatically deactivate the function.
TEMPERATURE DISPLAY
TEMPERATURE button
Press the temperature button to change the temperature:
the value changes cyclically between 8°C ad 2°C.
Note: Displayed set points correspond to the average
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool SW8 AM2C XR at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool SW8 AM2C XR in the language / languages: All languages as an attachment in your email.
The manual is 10,61 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
