75499
11
Zoom out
Zoom in
Previous page
1/13
Next page
27
b.Draining fault
Waste water not pumped out.
In models with LCD display, the display shows:
For models with a fault display, depending on the
model, “FP” lights up and remains lit or flashes. If a
“Clean pump” indication is fitted, the red indication
next to it lights up.
For models with no fault display, the washing
machine stops in the appropriate programme step.
Stop the appliance and unplug it.
Check whether:
kinks are present in the drain hose;
the pump or the filter is blocked (see “Removing
the filter”)
IMPORTANT: make sure the water has cooled
before draining the appliance.
the drain hose is frozen up
Plug in the appliance once again.
Select and start the “Drain/Reset” programme.
If the fault occurs again, please contact After Sales
Service (see “After Sales Service”).
c. Fault in an electrical component
The appliance stops during the programme.
If a digital or LCD display is fitted, “F4
” to “F31” are
also displayed.
Select and start the “Drain” or “Reset” programme.
Next, select and start the desired programme.
For models with no fault display, the washing
machine stops in the appropriate programme step.
Switch the washing machine off and back on again
to continue the programme.
If the fault persists, please contact After Sales
Service (see “After Sales Service”).
d.Water Stop fault (if available)
The “Water Stop” may have been triggered by:
1. excess foaming
2. a leak in the washing machine
In this case the pump is switched on automatically
in order to drain the water
In models with LCD display, the display shows:
Water Stop Fault
For models with a fault display, the “Water Stop”
indicator light lights up. The display shows “FA or
alternately “F” and “A” and the pump is running.
Switch off the appliance, unplug it and make sure
that the water tap is closed.
Carefully tilt the appliance forwards to allow the
water to flow out.
Then:
1. Plug in the appliance.
2. Turn the water tap on (if water immediately
flows into the appliance again, without the
appliance running, there is a fault. Shut the water
tap, then call After-Sales Service).
3. Select and start the desired programme again.
30105536aGB.fm Page 27 Thursday, December 30, 2004 10:53 AM
Black process 45.0° 100.0 LPI
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool Senseline 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool Senseline 1400 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool Senseline 1400

Whirlpool Senseline 1400 Quick start guide - English - 2 pages

Whirlpool Senseline 1400 User Manual - English - 12 pages

Whirlpool Senseline 1400 Quick start guide - German - 2 pages

Whirlpool Senseline 1400 User Manual - German - 14 pages

Whirlpool Senseline 1400 Quick start guide - Dutch - 2 pages

Whirlpool Senseline 1400 User Manual - Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info