Zoom out
Zoom in
Previous page
1/6
Next page
1
MACHINE OPERATION
Additional information (including troubleshooting and service) can be found in the individual chapters of
the Instructions for use.
Sort laundry according to
care symbols
Do not tumble dry
Suitable for tumble drying
at low temperatures
Suitable for tumble drying
Sort laundry by:
Material thickness: whenever there is greater load than the dryer can handle, separate
laundry according to weight (e.g. dry towels and thin underwear separately).
Type of material: cotton (linen); synthetic textiles (easy care).
Degree of drying: cupboard dry, iron dry etc.
Do not tumble dry: nylon stockings, delicate embroidery, fabrics with metallic decorations.
Preparing laundry
Check that all fastenings are closed and that pockets are empty.
Please ensure that there are no cigarette lighters in the laundry.
Turn laundry inside out.
Loading dryer
Place laundry loosely in the drum to achieve equal drying throughout.
Then close the door.
Selecting programme
Select the drying programme required by turning the programme selector knob (for
information, refer to programme table).
If you do not start the programme soon after having made your choice, the dryer will switch
off after a few minutes.
To switch the dryer on again turn the programme selector knob to “Off” (“0”) and afterwards
to the desired programme.
Selecting options
(if available)
Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection.
A fast blinking lamp indicates a wrong selection is made (incompatible options).
Press the button again to cancel the option.
Starting dryer
The drying programme is started by pressing the “Start (Pause)” button.
The relevant indicator lamp lights up.
Changing programme selection: If the programme selected is changed during drying, the
dryer stops.
The “Start (Pauze)” (Start (Pause)) indicator lamp flashes.
To operate the new programme, press the “Start (Pause)” button again.
Interrupting programme: To interrupt a drying cycle, press the “Start (Pause)” button and
open the door.
Wait at least 5 minutes, to allow the laundry to cool down, before you unload the dryer.
For your safety the drying cycle stops automatically if you open the door.
To restart, after door opening, close the door and press the “Start (Pause)” button again.
Warning: Never stop a tumble dryer before the end of the drying cycle, unless all items are
quickly removed and spread out so that the heat is dissipated.
Programme end
unloading dryer
The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the items
reach a lower temperature to avoid wrinkling.
End: Take the laundry out of the dryer.
The drying process is complete.
“Anticrease”: If the laundry is not removed at the end of the drying cycle, an automatic anti-
crease cycle will operate for maximum 15 min (by choosing the option “Anticrease” this time
can be extended up to 12 hours).
The drum rotates to prevent the laundry from creasing.
After the end of the “Anticrease” the dryer will switch off after a short time, to save energy.
Switching dryer off
Set the programme selector knob to “Off” (“0”).
Cleaning the door filter after every cycle: open door, pull door filter up and out of machine and open it. Brush lint using a soft
brush or your fingertips. Close door filter and push firmly back into place.
Emptying water container: pull container out by the handle and empty. Replace the container when empty by pushing it
completely back into place.
Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which
have been provided with the garment or article.
Power consumption: in off-mode 0.11 W / in left on-mode 0.11 W
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    MACHINE OPERATION Additional information (including troubleshooting and service) can be found in the individual chapters of the Instructions for use. Sort laundry according to care symbols Do not tumble dry Suitable for tumble drying – at low temperatures Sort laundry by: Material thickness: whenever there is greater load than the dryer can handle, separate laundry according to weight (e.g. dry towels and thin underwear separately). Type of material: cotton (linen); synthetic textiles (easy care). Degree of drying: cupboard dry, iron dry etc. Do not tumble dry: nylon stockings, delicate embroidery, fabrics with metallic decorations. Suitable for tumble drying Preparing laundry Loading dryer Selecting programme Selecting options (if available) Starting dryer Check that all fastenings are closed and that pockets are empty. Please ensure that there are no cigarette lighters in the laundry. Turn laundry inside out. Place laundry loosely in the drum ...
  • Page 2

    Overview of programmes Type of textile Gentle Anticrease Beschermen Antikreuk+ Délicat Antifroissage Fabrics Programmes / Drying levels Extra dry Multi-layered, thick laundry such as: terry towels, terry towelling bath robes. Kastdroog plus Prêt à ranger Cupboard dry + Terry towels, dry towels, bed linen, underwear Kastdroog plus Prêt à porter Cupboard dry* Similar types of laundry which do not require ironing such as: dry towels, bed linen, underwear, baby clothes, T-shirts, cotton socks. Strijkdroog Prêt à repasser Iron dry* Laundry which requires ironing such as: bed and table linen, dry towels, T-shirts, polo shirts, work clothes. Extra droog Séchage renforce Extra dry Laundry with thick, multi-layered areas such as: bed and table linen, track suits, anoraks, blankets. Kastdroog plus Prêt à porter Cupboard dry* Laundry which does not require ironing such as: shirts, blouses, T-shirts, sportsware. St ...
  • Page 3

    HOW TO PROCEED IF… ...you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the following points before calling the customer service – also refer to relevant chapter in the Instructions for use) Drying takes too long / Laundry is not dry enough The dryer does not operate (after a power failure, always press the “Start (Pause)” button)  Has the correct drying programme been selected?  Has the cycle been interrupted (door opening, full water container)?  Was the inserted laundry too wet (washing machine spin speed less than 1000 rpm)?  Is the door filter dirty (filter indicator light on)?  Is the heat exchanger dirty (for more information, refer to the Instructions for use)?  Is the room temperature too high?  Is the “End” and “Anticrease” indicator lamp lighting up? The drying cycle is complete and the laundry can be taken out.  If the drying result does not meet your expectation, select a more dry pro ...
  • Page 4

    FAILURE CODES In case of a malfunction of the dryer, one the following failure codes could be displayed. Depending on the model of your dryer, the failure can be displayed in letters or by different blinking lamps. Failure code Check needed by customer before Service call Lamps failure code F01 Please call the After-Sales-Service. F02 Please call the After-Sales-Service. F03 Please call the After-Sales-Service. F04 Please call the After-Sales-Service. F05 Turn OFF the dryer. Unplug the dryer. Assure that the ambient temperature is between 5°C and 35°C. Wait for 1 hour. Plug the dryer again and restart the dryer. If the failure occurs again, please call the After-Sales-Service. F06 F07 F10 – F24 Turn OFF the dryer. Unplug the dryer. Wait for 30 minutes. Plug the dryer again and restart the dryer. If the failure occurs again, please call the After-Sales-Service. Start lamp is blinking 2 times per second when it is pressed ...
  • Page 5

    Before using the machine, please also read the instructions for use carefully! Quick Reference Guide Indicator lamps and Options Programme selector knob “Remaining time” display The drying programme is selected by turning this knob. The “Start (Pause)” indicator lamp flashes. Depending on the programme selected a default drying time is displayed. After start of cycle the time displayed is corrected depending on the volume, type and moisture of the laundry. The drying time specified is a calculated value which will be updated during the drying cycle. The flashing lines indicate that the calculation is running. The remaining time will be updated. “Start (Pause)” button The drying programme is started by pressing this button. The indicator lamp lights up. Door Filter The indicator lamp lights up when the door filter needs to be cleaned. Clean the door filter at the end of every drying cycle. Eco Monitor The “Eco monitor” gives you a rough feed ...
  • Page 6

    Overdry protection / 6th Sense Finish in The indicator lights up when a humidity controlled programme is selected, to indicate the activated protection function. With this function you can postpone your programme to complete at a later time: press the button to select in how many hours the programme shall be finished.  Thus, it allows you to have your laundry ready at a particular time and to profit from more favourable energy rates during the night, for example.  The “Finish in” function can be selected in full hour time segments (1 to 24 h). When you press the button, the shortest possible time will be displayed; keep on pressing the button to loop through all the available times. To remove it again, set the index of the programme selector knob to the “Off” “(0)” position.  When you have selected the desired “Finish in” time, press “Start” – the countdown will begin.  During the countdown, you can still modify the option setting (select or deselec ...



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool PURE 7K410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool PURE 7K410 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool PURE 7K410

Whirlpool PURE 7K410 User Manual - English - 18 pages

Whirlpool PURE 7K410 User Manual - German - 17 pages

Whirlpool PURE 7K410 Quick start guide - German - 6 pages

Whirlpool PURE 7K410 User Manual - Dutch - 17 pages

Whirlpool PURE 7K410 Quick start guide - Dutch - 6 pages

Whirlpool PURE 7K410 User Manual - French - 17 pages

Whirlpool PURE 7K410 Quick start guide - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info