THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on www.whirlpool.eu/register
Before using the appliance carefully read
Health and Safety guide.
2. Control panel
3. Water tank
5. Door handle
6. Door filter (behind door)
7. Bottom filter (behind flap)
8. Adjustable feet (4)
1. On/Off button (Reset if long
2. Programme button (Water
conductivity setting if long
3. Cycle end alert
4. Key lock
5. Steam option
6. Knob (Turn to select / Press to
7. Start delay
8. Drying time
9. Dryness level
10. Options button
11. Start / Pause button
13. Programmes area
FIRST TIME USE
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the drain hose on the back of the dryer is fixed
correctly, either to the dryer’s water tank (see picture), or to your
domestic sewage system (see Installation guide).
Also make sure that the water tank is correctly inserted.
See Use and Care Guide for more details on functions /
see last page for information on how to obtain the Use and Care Guide
Make sure that no lighters
or matches remain in the
1. LOAD LAUNDRY
Prepare your laundry according to the recommendations in
section HINTS AND TIPS.
Make sure that pockets are empty, fasteners closed and
ribbons tied together.
Open the door and load the laundry. Observe the
maximum load sizes given in the PROGRAMME CHART.
Make sure that the laundry
is not soaked with
4. SET THE DESIRED PROGRAMME
GUIDED MODE – the button light will guide you through
setting your progra ...
Turn the knob to select the desired drying time. Confirm it
by pressing the knob.
Set dryness level, if needed
If you want to change the dryness level, make sure that the
Dryness level button « lights up.
Turn the knob to select the desired dryness level, then press
the knob to confirm.
Select options, if needed
If you want to select additional options, make sure that the
Options button « lights up. The options which are selectable
for your programme are indicated by lighting arrows.
To change the settings of a running programme or start
delay, you can also:
• press Start/Pause to put the running programme on pause
• change your settings
• press Start/Pause again to continue the programme.
RESET A RUNNING PROGRAMME, IF NEEDED
Press and hold the On/Off button « until “rES” appears on
Turn the knob to select the desired options. The symbol of
the selected option will blink. To confirm it, press the knob.
The programme is ended afterward ...
HINTS AND TIPS
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
The dots indicate the temperature degree for drying the laundry.
ADAPTING THE DRYER TO WATER CONDUCTIVITY
The drying results are affected by the conductivity of the water used
during washing. If, by modifying the available dryness levels (iron
dry; cupboard dry; extra dry), you are not satisfied with the final
drying results, you can adapt the water conductivity level. The dryer
comes with preset level 2. Choose between level 1 (most damp
results) and 5 (most dry results).
Press and hold the Programme button until the Conductivity
Adjustment symbol on the display blinks.
Do not tumble dry
EMPTY ALL POCKETS
Objects like coins or keys can damage your laundry as well as the
Turn the knob to adjust the level (1 –2 – 3 – 4 - 5).
Press the knob to confirm the selected level.
This operation i ...
Make sure that your laundry is suitable to be treated in a tumble
dryer. Refer to HINTS AND TIPS / Care labels.
For drying normally wet cotton laundry.
Standard cotton programme, suitable to dry normal wet
cotton laundry. Most efficient programme in terms of
energy consumption for drying cotton laundry.
The values on the Energy Label are based on this
For drying cotton laundry.
For drying mixed laundry made of cotton, linen, synthetic
fibres and their blends.
For refreshing laundry with steam. Specifically designed to
refresh and remove odors from dry and clean casual
garments like shirts, blouses, trousers made out of cotton,
synthetics and their blends. Before loading the laundry into
the drum, slightly humidify it by spraying it with water
(maximum 200 ml; use a water spray bottle). Dryness level
Cupboard dry is preset and cannot be changed. After
programme end, unload the laundry immediately and pu ...
Cupboard dry (dry enough to be placed in a
cupboard at the end of the drying cycle)
Extra dry (maximum dryness level)
To unlock the keys:
• Press and hold the Key lock button until the button light
Not combinable with Steam option.
Moves the start of your programme to a later time.
Choose a delay up to 23 hours.
• Select programme and options.
• Press the Start delay button « – the Start delay symbol on
the display blinks.
• Turn the knob to select a delay up to 23 hours, which will
be shown on the display. Confirm the desired delay by
pressing the knob. The Start delay symbol on the display
lights up solidly.
• Press Start / Pause - the display shows the countdown of
the delay until start of the programme. The Start / Pause
button lights up. A sound by activation of the pump may
• After the delay has expired, the dryer starts automatically.
The display then indicates the remaining programme
CARE AND MAINTENANCE
Switch off and unplug the
dryer before doing any
cleaning and maintenance.
EMPTY WATER TANK AFTER EACH DRYING CYCLE
Hold the handle and carefully pull out the water tank. Hold the full
water tank with both hands.
Empty the water and insert the container by pushing it back into
place. Make sure that it is properly inserted.
CLEAN DOOR FILTER AFTER EACH DRYING CYCLE
Open the door and remove the door filter by pulling it upwards.
Caution, the water in the
water tank can still be hot.
CLEAN THE BOTTOM FILTER AFTER ABOUT EVERY FIFTH
Open the bottom flap. Hold the handle and pull out the bottom
Remove the foam from the bottom filter, to clean it. Clean the filter
foam and the filter by hand or under running water. Do not wash it
in the washing machine. Wring out the filter foam. Do not insert it in
the bottom filter dripping wet.
Press the button to open the door filter. Remove the lint inside.
Close the f ...