650774
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
EN
3. SWITCH ON DRYER
Press the On/O button. An animation appears on the
control panel, and there is a sound. Afterwards the dryer is
ready to be operated.
4. SET THE DESIRED PROGRAMME
Select programme:
Press the programme symbol on the control panel. Programme
name, default dryness level and default programme duration
appear on the display.
Change the dryness level, if needed
Press the Dryness level button to select the desired dryness
level:
iron dry
cupboard dry
extra dry
The symbol on the control panel lights up.
Select options, if needed
Press the options button; the list of available options appears
on the display. Press the UP or DOWN key to navigate through the
list. Press the OK key to select the desired option; a checkmark
appears on the display next to the option name, and the option
symbol lights up.
Some options / functions can be selected by directly pressing the
button:
If an option is not selectable for the programme, it shortly blinks
and switches o again when the button is pressed , and there is a
sound.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
If “Drying time” or “Airing” programme was selected:
To adapt the drying or airing time,
- press the Drying time button
- adjust the desired drying or airing time by pressing the drying time
button repeatedly, or alternatively by pressing the UP or DOWN key.
Conrm the selected duration by pressing the OK key.
5. START PROGRAMME
Press and hold Start/Pause until the button lights up
solidly. After a short load sensing phase, the drying process
starts.
The display indicates the remaining programme duration and the
current programme phase.
The duration can be recalculated and adapted in the course of the
programme. During such phases, the display indicates the sensing
phase, and an animation is shown on the control panel.
6. CHANGE THE SETTINGS OF A RUNNING PROGRAMME,
IF NEEDED
You can still change some settings after a programme was started:
Adjust drying time (only if programme Drying time or Airing is
selected).
Adjust or cancel “Finish in”, if a delay was selected and started.
Add or cancel an option, provided the progress of the programme
still allows it.
Press the relevant button. The selected setting will blink for a few
seconds.
While blinking, you can adjust the setting by pressing the UP or
DOWN key. If the value or setting stopped blinking, press the
button again.
Press the OK key to conrm the modication. If you do not
conrm, the modication will be conrmed automatically – the
modied setting will stop blinking after a while.
The programme will continue automatically.
To change the settings of a running programme or delay, you can
also:
Press Start/Pause to put the running programme on pause
Change your settings
Press Start/Pause again to continue the programme.
7. RESET A RUNNING PROGRAMME, IF NEEDED
Press and hold the On/O button until the display indicates
that the programme is cancelled.
Immediately open the door and unload the laundry, so that
eventual heat in the laundry can dissipate.
8. SWITCH OFF THE DRYER AFTER PROGRAMME END
The display indicates that the cycle has nished. Press On/
O to switch o the dryer. Open the door and take out the
laundry.
The dryer will switch o automatically in about a quarter of an
hour after programme end, to save energy.
If not switched o right after programme end, the dryer will
tumble the laundry for about 10 minutes, to avoid creasing.
The display alternately indicates the programme end and the
anti-crease phase. This phase can be ended by either switching of
the dryer as mentioned above, or by opening the dryer door.
9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN
BOTTOM FILTER
Refer to section CARE AND MAINTENANCE.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool HSCX 10441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool HSCX 10441 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool HSCX 10441

Whirlpool HSCX 10441 Usermanual and installation guide - English - 56 pages

Whirlpool HSCX 10441 Quick start guide - German - 8 pages

Whirlpool HSCX 10441 Usermanual and installation guide - German - 56 pages

Whirlpool HSCX 10441 Quick start guide - Dutch - 8 pages

Whirlpool HSCX 10441 Usermanual and installation guide - Dutch - 56 pages

Whirlpool HSCX 10441 Quick start guide - French - 8 pages

Whirlpool HSCX 10441 Usermanual and installation guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info