650642
7
Zoom out
Zoom in
Previous page
1/45
Next page
7
EN
fuse cover.
3. Ret both into plug.
Important:
The fuse cover must be retted
when changing a fuse and if
the fuse cover is lost the plug
must not be used until a cor-
rect replacement is tted.
Correct replacement are identi-
ed by the colour insert or the
colour embossed in words on
the base of the plug.
Replacement fuse covers are
available from your local elec-
trical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will fre-
quently apply, but a third type
of plug and socket is also used,
the 2-pin, side earth type.
Socket outlet / plug (valid for
both countries)
If the tted plug is not suitable
for your socket outlet, please
contact After-sales Service for
further instruction. Please do
not attempt to change plug
yourself. This procedure needs
to be carried out by a qualied
technician in compliance with
the manufactures instructions
and current standard safety
regulations.
CORRECT USE
Do not exceed the maximum
load allowed. Check the maxi-
mum load allowed in the pro-
gramme chart.
Do not dry unwashed items in
the tumble dryer.
Do not overdry the laundry.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in compli-
ance with the manufacturer
instruction and current safety
regulations. Contact an author-
ized service centre.
Do not operate this dryer if it
has a damaged mains cord or
plug, if it is not working prop-
erly, or if it has been damaged
or dropped. Do not immerse
the mains cord or plug in wa-
ter. Keep the cord away from
hot surfaces
The electrical components
must not be accessible to the
user after installation.
Do not touch the dryer with
any wet part of the body and
do not operate it when bare-
foot.
ELECTRICAL CONNECTION
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement.
If the mains lead of this dryer is
tted with a BS 1363A 13amp
fused plug, to change a fuse in
this type of plug use an A.S.T.A.
approved fuse to BS 1362 type
and proceed as follows:
1. Remove the fuse cover (A)
and fuse(B).
2. Fit replacement 13A fuse into
If, due to lack of space, the
dryer must be installed directly
next to a gas or coal stove, a
heat insulating plate (85 x 57 cm)
must be installed in between
and the side of the plate fac-
ing the stove must be covered
with aluminium foil.
The dryer is not designed for
built-in installation.
The dryer can be installed un-
der a worktop, provided that
adequate ventilation of the
dryer is assured. Install a ven-
tilation grid (minimum 45 cm
x 8 cm), in the rear part of the
worktop under which the dryer
is installed.
ELECTRICAL WARNINGS
Make sure the voltage speci-
ed on the rating plate corre-
sponds to that of your home.
For installation to comply with
current safety regulations, an
omnipolar switch with mini-
mum contact gap of 3mm is
required.
Regulation require that the
dryer is earthed.
For dryers with tted plug, if
the plug is not suitable for you
socket outlet, contact a quali-
ed technician.
Do not use extension leads,
multiple sockets or adapters.
Do not connect the dryer to a
socket which can be operated
by remote control.
The power cable must be long
enough for connecting the
dryer, once tted in its hous-
ing, to the main power supply.
Do not pull the power supply
cable.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

whirlpool-hscx-10431

Reset search

  • Is there Transit Bolts in the HSCX10431 Whirlpool 10kg dryer Submitted on 27-2-2020 at 15:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool HSCX 10431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool HSCX 10431 in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool HSCX 10431

Whirlpool HSCX 10431 Quick start guide - English - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info