Manual Whirlpool FSCR12441 (page 11 of 12) (English)

650492

Zoom out

Zoom in

1/12

To cancel the delay

• either press Start/Pause to cancel the delay; to start the selected

programme immediately, press Start/Pause again

• or press and hold On/O to cancel the complete programme

setting.

Key lock

To lock the buttons and keys of the control panel against

unwanted operation.

To lock:

• The washing machine must be switched on.

• Press and hold the option button until the display

indicates that the keys are locked. The buttons and keys

are locked now; only On/O works.

If you switch the washing machine o and on again, the key

lock remains active until you unlock it.

To unlock: press and hold the option button again for at least 3

seconds, until the display indicates that the keys are unlocked.

INDICATORS

Door can be opened

Energy / Water monitor

Gives feedback about the energy and water

consumption of your programme setting.

The less indicators light up, the more economic

is your programme setting. Can still adapt after

sensing phase of laundry load.

Failure: Observe the display message.

For any failures , refer to section Troubleshooting in the

“Use and Care Guide”.

Descaling

A display message will remind you regularly to descale the washing

machine. Find descaler appropriate for the washing machine on

www.whirlpool.eu.

To cancel the display reminder, press the OK key.

Connection status

If your washing machine has been already connected to

the Internet (see 6th Sense Live Remote Control / Setup

Procedure section in the Use and Care Guide) this indicator

provides a feedback about the status of the Internet connection

through your WiFi router.

When you switch on the washing machine, the connection status

indicator blinks: the washing machine is looking for a connection.

When it becomes solidly lit, it means that the appliance is properly

connected to the Internet.

The strength of the wireless signal is shown by the indicator (when

all the elements of the indicator are lit, the signal strength is strong).

6th Sense Live Remote Control

The 6th Sense Live feature allows to remotely monitor and

control your washing machine using a smartphone or a

tablet. To use this feature you have to successfully connect

the machine to your home wireless network and to the Internet by

following the set-up procedure described in the Use and Care Guide

(6th Sense Live Feature / Setup Procedure section).

You can monitor the status of your washing machine at any time

using the 6th Sense Live app. If you want to control the appliance

remotely (for example: to set and start a programme), the Remote

Control has to be enabled.

To enable Remote Control:

• Make sure the router is on and connected to the Internet.

• Switch on the washing machine.

• Load your laundry, close the door, add the detergent and

make sure the water tap is open.

• Make sure the Connection Status indicator is solidly lit.

• Press the Remote Control button, the door locks and the

buttons and keys on the control panel are disabled. The

only controls still active are “Remote Control”, “ON/OFF”

and “Key Lock”.

• The washing machine is now in Remote Control mode and is

ready to be controlled via 6th Sense Live app.

• If you start a programme remotely, at the end of the programme

the washing machine will automatically exit the Remote Control

mode and will switch o.

To manually exit Remote Control:

• With the machine in Remote Control, press again the Remote

Control button. You will regain local control over the control panel

of the washing machine.

Rinse hold (selectable with Spin button)

Avoids automatic spinning of the laundry at the end of the

programme. The laundry remains in the last rinse water, the

display indicates the rinse hold and the programme does not

continue.

Suitable for delicate laundry which is not appropriate for spinning,

or which should be spun with a low spin speed. Not suitable for silk.

To select “Rinse hold”:

• Press the spin button; select Rinse hold. The Rinse hold symbol on

the display lights up.

The display indicates when the programme has reached the Rinse

hold. Choose to:

• drain the water, no spin:

press the Spin button, or the UP or DOWN key, to select

spin speed “0”. Or select programme Drain. Afterwards

press Start/Pause: the water will be drained and the

programme ended.

• spin the laundry:

the default spin speed blinks - start the spin cycle by

pressing Start/Pause. Or select a dierent spin speed by

pressing the Spin button and the UP or DOWN key, and

press Start/Pause.

Finish in

Enables to have the laundry ready at a particular time by

setting a delay until end of the programme.

Choose a delay up to 23:30 hours. Only if you add detergent

manually: use powder - and not liquid - detergent with this function

to ll the detergent compartment for manual dosing.

Select programme, temperature and options.

• Press the “Finish in” button – the button lights up.

• Press UP or DOWN key to select a delay up to 23:30 hours.

• Press “Start / Pause” - the countdown of the delay starts. The

display indicates the Finish in period (= time until end of

programme), as well as the default programme duration.

• The programme starts automatically, in time to be nished at the

end of the delay period. On programme start, the delay on the

display is replaced by the current programme status.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR12441 in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR12441

Whirlpool FSCR12441 Usermanual and installation guide - English - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool FSCR12441 Manual

Product: