607076
8
Zoom out
Zoom in
Previous page
1/8
Next page
8
FUNCTIONS
Rinse hold (option on Spin button)
Avoids automatic spinning of the laundry at the end of the
programme. The laundry remains in the last rinse water and
the programme does not continue.
Suitable for delicate laundry which is not suitable for spinning, or
which should be spun with a lower spin speed. Not suitable for silk.
To end the “Rinse hold” function, choose between:
drain the water, no spin:
turn the knob to select spin speed “0”, then press Start/
Pause”: The water will be drained and the programme
ended
spin the laundry:
the default spin speed flashes – start the spin cycle by
pressing “Start/Pause”.
Or select a different spin speed by turning the knob, press
it to confirm, and press Start/Pause”.
Start delay
Moves the start of your programme to a later time.
Do not use liquid detergent with this function.
Select programme, temperature and options.
Press the “Start delay button – the start delay symbol on the
display flashes.
Turn the knob to select a delay of up to 23 hours, which will be
shown on the display. Confirm by pressing the knob.
Press “Start/Pause – the countdown for the delay starts. The colon
on the display flashes. The door locks.
If you have selected Dosing Aid: When you press Start/Pause, the
washing machine calculates the recommended detergent
amount. Add detergent as indicated on the display (see “Dosing
Aid”). Press “Start/Pause again to start the countdown for the
selected delay period.
After the delay time has been reached, the washing machine starts
automatically. The display then indicates the remaining
programme duration.
To cancel “Start delay”:
Press “Start/Pause to cancel start delay.
Key lock
Locks the buttons and the knob on the control
panel against unwanted operation.
To lock the buttons:
The washing machine must be switched on.
Press and hold the option button until the key symbol on
the display lights up. The knob and the buttons are now
locked. Only “On/O works.
If you switch the washing machine off and on again, the key
lock remains active until you unlock it.
To unlock the buttons, press and hold the option button
again, until the key symbol on the display goes off.
INDICATORS
Door can be opened.
Failure: Water tap closed. The washing machine has no/
insufficient water supply.
Failure: Water lter clogged. Water cannot be drained;
water filter might be blocked
Failure: Call Service. Refer to Troubleshooting section in
the Use and Care Guide.
In the event of any failures, refer to the Troubleshooting section in
the “Use and Care Guide”.
EN
400010807084
MAINTENANCE AND CLEANING
AND TROUBLESHOOTING
For maintenance and cleaning, and for
troubleshooting, see the
Use and Care Guide.
The Use and Care Guide can be obtained as
follows:
After-Sales Service; using the phone
number in the warranty booklet
Download from the Whirlpool Website
http://docs.whirlpool.eu
CONTACTING AFTER-SALES SERVICE
Provide both numbers shown on the service sticker inside the door
when contacting the After-Sales Service team.
http://www.whirlpool.eu
The phone number can be found in the warranty booklet.
Whirlpool® is a registered trademark of Whirlpool, USA
001
n
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR 80211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR 80211 in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR 80211

Whirlpool FSCR 80211 User Manual - English - 54 pages

Whirlpool FSCR 80211 Quick start guide - French - 8 pages

Whirlpool FSCR 80211 User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info