607070
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
EN
See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
1. LOAD LAUNDRY
Prepare your laundry according to the recommendations in
section “HINTS AND TIPS”.
Make sure that fasteners are closed and ribbons tied together.
Open the door and load the laundry.
Observe the maximum load sizes given in the
programme chart
2. CLOSE DOOR
Make sure that no laundry gets stuck
between door glass and rubber seal.
Close the door so that you can hear it click
shut.
3. OPEN THE WATER TAP
Make sure that the washing machine is connected
to the mains.
Open the water tap
4. SWITCH ON WASHING MACHINE
Press the On/O button. An animation appears, and there
is a sound. The programme which was used last lights up.
Afterwards the washing machine is ready to be operated.
5. SET THE DESIRED PROGRAMME
Select programme:
Press the programme symbol on the control panel. Programme
name, default duration, temperature and spin speed as well as
maximum laundry load appear on the display.
Change temperature, if needed
Press the temperature button; the display indicates that the
temperature can be set.
Press the temperature button repeatedly
OR
press the UP or DOWN key until the needed temperature appears
on the display.
Change spin speed, if needed
Press the Spin button; the display indicates that the spin
speed can be set.
Press the Spin button repeatedly
OR
press the UP or DOWN key
until the needed spin speed, or Rinse hold, appears on the display.
DAILY USE
Select options, if needed
Press the options button. The options which are selectable
for the programme appear on the display.
Press the UP or DOWN key to navigate through the list of options.
Press the OK key to select an option; the option symbol lights up on
the control panel.
To deselect a selected option, press the OK key again.
Some options / functions can be selected by directly pressing the
button:
1 2
If such an option is not selectable for the programme, it switches o
automatically when the button is pressed.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
6. ADD DETERGENT
If you want to add the detergent manually, carefully pull
out the detergent dispenser and add detergent (and
additives) now, as indicated in section DETERGENT
DISPENSER.
Do not pull hard when opening the dispenser.
Observe the dosing recommendations on the detergent pack. If
you have selected PREWASH or FINISH IN, observe the instructions
in section PROGRAMMES AND OPTIONS, and FUNCTIONS.
Afterwards carefully close the detergent dispenser.
If you want the washing machine to dose the detergent
automatically, simply make sure the Auto Dosing function is
activated (refer to section OPTIONS, FUNCTIONS AND INDICATORS
/ Auto dosing). The detergent is added by the auto
dosing system after programme start.
7. START PROGRAMME
Press and hold Start/Pause” until the button lights up
solidly; the programme starts.
If you have selected Auto dosing, the display indicates
dispensing of the detergent after programme start. Observe the
instructions in section OPTIONS, FUNCTIONS AND INDICATORS /
Auto dosing function.
8. CHANGE A RUNNING PROGRAMME, IF NEEDED
You can still change the settings while a programme is running. The
changes will be applied, provided the respective programme phase
has not nished yet.
Before using this function, follow the instructions in the USE AND
CARE GUIDE/AUTO DOSING – FIRST USE to:
1. Set the correct water hardness level
2. Set tank 2 content. By default, Tank 1 is set for a detergent (your
main detergent), and Tank 2 is set for fabric softener. If you do not use
fabric softener, set Tank 2 for another detergent.
3. Check/adjust the preset dosing quantities.
By default, the system comes with the following dosing values:
• 80 ml detergent for Tank 1
• 30 ml softener for Tank 2
You need to adjust these preset dosing values to the dosing values
reported on the detergent and softener package that you intend to
use.
After the Auto Dosing function is set for use, ll the tanks with the
appropriate content and install the labels on the tanks accordingly, as
explained in the USE AND CARE GUIDE / AUTO DOSING – FIRST USE.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR 10433 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR 10433 in the language / languages: English as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR 10433

Whirlpool FSCR 10433 Quick start guide - French - 8 pages

Whirlpool FSCR 10433 User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info