307926
2
Zoom out
Zoom in
Previous page
1/2
Next page
5019 301 01027
Whirlpool is a registered trademark of Whirlpool USA.
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)
Cotton
95 6,0 59 * 1.90 2:00
Cotton **
60 6,0 49 1.14 2:20
Cotton
40 5.0 56 0.70 2:00
Synthetics
60 2.5 50 * 0.80 1:35
Synthetics
40 2.5 46 0.50 1:20
Delicates
30 1.5 60 0.50 0:45
Quick wash
30 3.0 41 0.40 0:30
Wool
40 1.0 60 0.50 0:45
Handwash
40 1.0 45 0.50 0:40
Handwash
30 1.0 45 0.40 0:36
Add detergents as indicated on the front page
and as described in your Instructions for Use.
Close the door and turn the programme
selector to the desired programme and
temperature. The indication lamp next to the
“Start/Pause” button blinks.
CONSUMPTION DATA
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456.
Consumption data in the h
ome may vary with respect to the values in the table in relation to the water supply pressure
and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
“DOOR OPEN” INDICATION
Before starting and after end of a programme,
the lamp lights to show the the door can be
opened. As long as a wash programme is
running, the door remains locked and must on
no account be forced open. In case you have
an urgent need to open it during a running
programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be
caused by a fault in an electrical component.
Refer to the “Troubleshooting Guide” in your
“Instructions for Use”; if the fault persists,
contact our After Sales Service.
Water tap closed”
The appliance has no or insufficient water
supply. Open the water tap: if the indications
still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check
whether the drain hose is kinked or the filter
must be cleaned: in the latter case refer to the
Instructions for Use (“Removing the Filter”).
“Intensive rinse” button
More water is added and rinse cycle is
prolonged.
This option is particularly suitable for areas
with very soft water, washing baby linen and
helps people with allergies.
“Spin speed reduction” button
Reduces the predermined automatic
maximum spin speed to treat your laundry
more gently.
PROGRAMME START
Open the tap and press the “Start/Pause”
button. The indication lamp next to the
“Start/Pause” button lights up. The
programme sequence indicator shows the
current programme phase, running from left to
right through Wash, Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.
PROGRAMME END
All the lights of the programme sequence
indicator are off, and the “Door open
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause
the programme. The light blinks.
2. Select the new programme (with
temperature), any options and another spin
speed if you want.
3. Press the “Start/Pause” button again.
The new programme continues at the same
position where the previous programme
was interrupted. Do not add detergent for
this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme
before the end.
Press the “Reset” button for at least 3
seconds
.
Any existing water is drained out before the
door can be opened.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and
additional option(s) is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awo 426 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awo 426 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool awo 426

Whirlpool awo 426 User Manual - English - 14 pages

Whirlpool awo 426 User Manual - German - 13 pages

Whirlpool awo 426 User Manual - German - 2 pages

Whirlpool awo 426 User Manual - Dutch - 2 pages

Whirlpool awo 426 User Manual - Dutch - 13 pages

Whirlpool awo 426 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info