571847
14
Zoom out
Zoom in
Previous page
1/16
Next page
30
INSTALLATION
Remove the transit screws
The appliance is fitted with two transit screws and a transit bar
to prevent internal damage while it is being moved.
Before using the appliance the transit screws and transit bar
MUST be removed.
The appliance is fitted with two screws and a transit bar.
1.
Remove the black screw
(A)
with a screwdriver.
2.
Unscrew the screw
(B)
on the red transit bar with a screwdriver.
3.
Completely withdraw and remove the transit bar
(C)
by pulling
firmly on the red handle.
Keep the screws and the bar for future use.
Note:
Refit the transit screws and transit bar before transporting
the appliance by repeating the above steps in reverse order. In
order to locate the screws and bar correctly, it will be necessary
to remove the appliance top, having first made sure that the
appliance is disconnected from water and electricity supplies.
Adjust the feet
If the floor is uneven, adjust the levelling feet as required (do not
insert pieces of wood etc. under the feet):
Adjust the right foot by turning it by hand to assure that all
four feet touch properly the floor.
If the appliance is to be installed on a wooden floor, distribute
the weight by placing it on a 60 x 60 cm sheet of plywood at least
3 cm in thickness.
Secure the plywood sheet to the floor.
3gb10006.fm5 Page 30 Tuesday, May 15, 2001 3:21 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWM 790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWM 790 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWM 790

Whirlpool AWM 790 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info