133819
2
Zoom out
Zoom in
Previous page
1/16
Next page
20
PREPARATION BEFORE USE
SAFETY PRECAUTIONS
Before using the air conditioner, be sure to check and preset the following.
Remote Control presetting
The remote control is NOT preset as Cooling Only Air Conditioner or Cooling Air Conditoner with Electric Heater
by manufacturer.
Each time the remote control batteries are replaced, the Cooling indicator and Heating indicator will flash
alternately on the remote control LCD.
The user can preset the remote control depending on the type of air conditioner purchased:
when flashes, press any button to set Cooling Air Conditioner with Electric Heater;
when flashes, press any button to set Cooling Only.
If you don’t press any button within 12 seconds, the remote control will be automatically preset as Cooling Air
Conditoner with Electric Heater (6th Sense mode).
Be sure not to do the following.
Do not direct the cool air at yourself for long period of time, this may harm
your health. Deflect the air flow around the entire room.
Do not direct the air flow towards gas burners and stoves.
Do not touch the operation buttons when your hands are wet.
Pay attention to such a situation.
Do not repair the appliance by yourself. Mistakes may result in electric
shock etc..
Be sure to follow this instruction.
Do not put any objects on the outdoor unit.
Earthing is essential.
It is the user’s responsibility to have the appliance earthed according to
local laws by a qualified technician.
Warning: Incorrect handling could cause a serious hazard, such as
death, serious injury, etc.
Connect to the correct power supply as specified on the rating plate and
do not use extension cables which could generate a serious fault or
hazard, or cause a fire to break out.
Keep the power supply circuit breaker or plug clean. Make sure the power
cable is plugged in securely and correctly as insufficient contact could
cause electric shock or fire.
Do not try to disconnect the circuit breaker or pull the plug out to turn
the appliance off. This may cause a fire due to sparks, etc.
Do not twist, pull or press the power cable as this may damage the cable
and result in electric shock or fire.
Do not insert sticks or similar objects into the appliance as this could cause
injury when the fan rotates at high speed.
In the event of a fault, switch the appliance off using the remote control
before disconnecting it from the power supply.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool amd 096 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool amd 096 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool amd 096

Whirlpool amd 096 User Manual - German - 15 pages

Whirlpool amd 096 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info