515828
22
Zoom out
Zoom in
Previous page
1/26
Next page
50
Notes:
If the connecting cable is not long enough, please contact the authorized service center for a
length of special cable. No joints are allowed in the cable.
Make sure to connect the cable correctly. Incorrect connection will cause malfunction of
some electrical parts.
Tighten the terminal screw to prevent slack.
After tightening the screw, gently pull the cable taut.
Incorrect connection of grounding cable may cause electrocution.
Make sure to fasten the junction cover plate securely and press it tightly against the
connecting cable. Improper fastening may allow dust or water to enter or expose
connecting terminal directly to external forces, and fire or electrocution could occur.
Installing Indoor Unit
Fitting pipe can come from four directions, i.e. right, rear right, left and rear left.
1.
When installing the pipe on the left or right side, trim off any extra pipe left at the pipe outlet stub on
the base of the unit. (See Fig. 1).
When drawing out the power line, cut extra part 1. When drawing out the connecting pipe and the
power line, cut extra parts 1 & 2 (or 1, 2 & 3);
2.
Pull the fitting pipe out of the bottom case. Use adhesive tape to bind the fitting pipe, electrical cable
and drain hose properly and then pass them through the fitting pipe hole (See Fig. 2).
3.
Hang the claws on the back of the indoor unit to the hook on the wall-mounting frame. Move the
unit left and right to control that it is steady. (See Fig. 3).
4.
The installation height of the indoor unit must be at least 2.3m.
Installing Connecting Pipe
1.
The tapered end of the connecting pipe must be in line with the corresponding tape face of the valve joint.
2.
Tighten the nut manually on the connecting pipe and then use a wrench to tighten it fully.
Caution: Excess torque may damage the nut.
Fitting pipe on
air side
Fig. 1
Electrical cable for external
connection
Fitting pipe on
liquid side
Extra Part 3
Extra Part 2
Extra Part 1
Lastly, wrap with
adhesive tape.
Drainage Pipe
Left
Right rear
Fig. 2
Fastening
Hook
Fig. 3
Mounting
Plate
Mounting
Plate
Right Left rear
Heat insulation of fitting
pipe on liquid side
Hexagon Nut Tightening Torque
(Nlm)
Ø 6 15~20
Ø 9.5 31~35
Ø 12 50~55
Ø 16 60~65
Fitting Pipes of
Indoor Unit
Conical Nut
Fitting Pipes
Torque wrench
Spanner
32602005GB.fm Page 50 Thursday, December 14, 2006 11:24 AM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AMC 991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AMC 991 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AMC 991

Whirlpool AMC 991 User Manual - German - 25 pages

Whirlpool AMC 991 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info