531243
7
Zoom out
Zoom in
Previous page
1/8
Next page
17
Changing the rear oven lamp bulb (if provided):
1.
Disconnect the oven from the electrical supply.
2.
Let the oven cool before turning the lamp cover left to
unscrew it (see fig. 1).
3.
Change the bulb (see note).
4.
Screw the lamp cover back on.
5.
Reconnect the oven to the electrical supply.
Note: use only 25 W/230 V, E-14 type, T300°C bulbs
available from After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
Changing the side wall lamp
(if provided - depends on model):
1.
Disconnect the oven from the electrical supply.
2.
Let the oven cool before removing the left side runner grid
(see fig. 2). Using a screwdriver prise off the lamp cover (see
fig. 3 - 4).
3.
Change the bulb (see note).
4.
Reposition the lamp cover and press it against the oven wall
until it clicks correctly into place.
5.
Remount the side runner grid.
6.
Reconnect the oven to the electrical supply.
Note: use only 25 W/230 V, E-14 type, T300°C bulbs
available from After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
Changing the side halogen lamp
(if provided - depends on model):
1.
Disconnect the oven from the electrical supply.
2.
Let the oven cool before removing the side runner grid
(see fig. 2). Using a screwdriver prise off the lamp cover (see
fig. 3 - 4).
3.
Never replace bulbs with bare hands. Carefully remove the
halogen lamp from the ceramic holder and replace it with a
new one (see note).
4.
Reposition the lamp cover and press it against the oven wall
until it clicks correctly into place.
5.
Remount the side runner grid.
6.
Reconnect the oven to the electrical supply.
Note: Use only 20 W/12 V, G4 type, T300°C bulbs,
available from After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
2
3
4
1
31002018GB.fm Page 17 Tuesday, December 2, 2008 10:29 PM
7


Need help? Post your question in this forum.

Forumrules
1

Forum

whirlpool-akz-446

Reset search

  • Hi there
    My AKZ446 oven stopped working after an energy surge. I re booted the whole thing without luck. The grill and the fan seem to be OK but the oven does not warm up even a bit. Any suggestions or ideas?
    Thanks for your help!
    Submitted on 4-9-2022 at 13:02

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AKZ 446 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AKZ 446 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AKZ 446

Whirlpool AKZ 446 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info