129574
5
Zoom out
Zoom in
Previous page
1/6
Next page
5019 318 33145
AKR 631-666-812-966
AKR 943-948-952-995-996
Analogue control panel
Light : move the switch to the right or press the button to switch on.
Extraction speed : Move the switch to the right or press the next button to increase extraction speed
(or open the electric shutter ).
Digital control panel with sensors
The hood is fitted with a series of sensors which enable it to operate in 2 modes:
Automatic mode
and
Manual
mode
.
Automatic mode:
the hood switches on automatically, depending on the ambient temperature (and heat) and
variations in this detected by the hood's sensors. See description of Button 3 function.
Manual mode:
the hood is switched on by the user.
Description of Buttons
1.
OFF/Stand by button:
When the hood is OFF, all the controls are disabled (all LEDs are off).
When on stand-by, the hood is ready to operate in “
Manual mode
”, LED C lights up.
2.
Light ON/OFF button: always works, even when the hood is OFF.
3.
ON/OFF button “
Automatic mode
”: press to activate this mode (LED C and E on) the hood switches
on automatically, selecting a suitable extraction speed in accordance with the ambient temperature (and
heat) and any variations in this detected by the hood's sensors. Press again to revert to
“Manual mode”
:
LED E switches off, LED C remains on (stand by).
4.
ON/OFF button for controlling intensive extraction speed in “
Manual mode
” (LED D switches on):
when selected, it operates for 5 minutes, after which time the hood automatically reverts to the
previously selected extraction speed.
5.-6.
Buttons for controlling extraction speed 1 - 2 - 3 in “
Manual mode
”.
Description of LEDs
A. Carbon filter
saturation led indicator
: this led lights up to indicate that the carbon filter needs to be
cleaned or replaced.
Important: this indicator must be activated in order for the hood to work:
to activate it, press buttons
4 and 5 at the same time - LED B lights up first, followed by LED A to indicate that the led indicator is
working.
B. Grease filter saturation led indicator: this led lights up to indicate that the grease filter needs to be cleaned.
C. “Stand by” led indicator.
D. Intensive speed led indicator.
E. “Automatic mode” led indicator.
F. Extraction speed 1 led indicator.
G. Extraction speed 2 led indicator.
H. Extraction speed 3 led indicator.
Reset filters indicator:
After cleaning or replacing the filters, with the hood on
Stand by
press Button 1 for more than 3 seconds.
Safety function: this function is activated ONLY with the hood on stand-by, in the event of any SUDDEN,
VIOLENT increase in the temperature detected by the sensors, upon which the hood switches to “
Automatic
mode
” and, if necessary, selects a suitable extraction speed.
PRODUCT SHEET
IF NL E PGBD GR
31833145.fm Page 9 Monday, December 13, 2004 4:42 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool akr 996 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool akr 996 ix in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool akr 996 ix

Whirlpool akr 996 ix User Manual - English - 7 pages

Whirlpool akr 996 ix Installation Guide - German - 6 pages

Whirlpool akr 996 ix Installation Guide - Dutch - 6 pages

Whirlpool akr 996 ix User Manual - Dutch - 4 pages

Whirlpool akr 996 ix Installation Guide - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info