109428
4
Zoom out
Zoom in
Previous page
1/5
Next page
5019 318 33146
AKR 801
Pre-assemble the three parts of the flue support bracket G with 4 screws. The width of the bracket must be
identical to the internal width of the telescopic flue.
Remove the perimeter extraction panel (if relevant) and the grease filter/s.
1. Mark a line on the wall right up to the ceiling, corresponding to the centre-line of the hood (1).
2. Attach the hole diagram to the wall (2). The vertical centre line printed on the hole diagram must match
the lower edge of the hood.
3. Place the support bracket over the drilling template so that it matches the outlined rectangle (3). Mark and
drill the two outside holes. Remove the drilling template. Insert two wall plugs in the holes and fix the hood
support bracket (4) in place with two 5 x 45 mm screws.
4. Fix the central bracket K with 2 screws and wall plugs above the lower bracket (see the drilling diagram for
the position of holes (5)).
5. Hang the hood on the support bracket (6). Adjust the gap (7) and the horizontal alignment (8) of the hood.
6. From inside the hood, mark a hole for the final fixing of the hood (9).
7. Remove the hood from the bracket (10), drill the hole and insert 1 wall plug (11).
8. Fit the flue support bracket G to the wall against the ceiling (Align the small slot in the bracket with the
centre-line drawn on the wall - step 1- and fix in place with two wall plugs (12).
9. Hang the hood on the bottom support bracket (13). Fix the hood to the wall with 1 screw (14) 5x45 mm
(ABSOLUTELY NECESSARY).
10. Connect an exhaust pipe (15) to the collar B, the fumes must be ducted to the outside (extractor version)
or towards the deflector (filter version). Fix the deflector (F) to the flue support bracket G.
11. Make all necessary electrical connections (16).
12. Fit the flue unit onto the extractor unit (17).
13. Fix the flue unit to the extractor unit (18).
14. Fix the flues. Warning: check that the bottom section of the flue is securely fitted onto the central bracket
(19).
15. Fix the upper section of the flue unit to the flue support bracket G with 2 screws (20).
INSTALLATION - ASSEMBLY INSTRUCTIONS
IF NL E PGBD GR
31833146.fm Page 7 Monday, December 20, 2004 2:58 PM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AKR 801 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AKR 801 IX in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AKR 801 IX

Whirlpool AKR 801 IX User Manual - English - 6 pages

Whirlpool AKR 801 IX Installation Guide - German - 5 pages

Whirlpool AKR 801 IX User Manual - German - 4 pages

Whirlpool AKR 801 IX Installation Guide - Dutch - 5 pages

Whirlpool AKR 801 IX User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info