133044
11
Zoom out
Zoom in
Previous page
1/12
Next page
5019 318 33278
Description and use of hood
1. Control panel.
2. Grease filters.
3. Halogen lamps.
4. Telescopic flue.
5. Sensors.
Digital control panel with sensors
1. Motor ON/OFF
Press the button and the hood starts at speed 1.
Press the button during operation and the hood switches
OFF.
2. Increase speed / Speed timing
Press the button and the hood goes from OFF to speed 1.
Press the button (hood ON) to increase the motor speed
from speed 1 to intensive.
The respective LED (green) lights up at each speed.
Speed 1 LED “L1”
Speed 2 LED “L2”
Speed 3 LED “L3”
Intensive speed LED “L4” (blinking)
The Intensive speed is timed. The standard operating
time is 5 minutes, after which the hood goes to speed 2.
To deactivate the function before the time has elapsed,
press button “2”, the hood will go to speed 1; press
button 1 and the hood will switch off.
3. Light ON/OFF switch
4. Sensor ON/OFF switch
5. Operation status indicator
Speed timing
Press button “2” for 2 seconds to enable speed timing; the
hood switches off when the time has elapsed.
Operation times are as follows:
Speed 1 20 minutes (LED “L1” blinking)
Speed 2 15 minutes (LED “L2” blinking)
Speed 3 10 minutes (LED “L3” blinking)
Intensive speed 5 minutes (LED “L4” blinking)
During timed operation, press button “1” to switch off the
hood; press button “2” to return to the set speed; press
button “4” and the hood switches to “Cooking” mode.
Grease filter saturation indicator
After 80 hours of operation, LEDs “L1” and “L2” blink.
This indicates that the grease filter installed needs to be
cleaned.
To reset the indicator, keep button “1” pressed for 3 seconds”.
Carbon filter saturation indicator
After 320 hours of operation, LEDs “L2” and “L3” blink.
This indicates that the carbon filter installed needs to be
replaced.
To reset the indicator, keep button “1” pressed for 3
seconds”.
In the event both filters indicate saturation at the same time,
LEDs “L1”, “L2” and “L3” blink.
Reset by carrying out the above procedure twice.
The first time resets the grease filter indicator; the second
resets the carbon filter indicator.
The carbon filter saturation indicator is not active in the
standard mode.
If using the hood in filter version, activate the carbon filter
saturation indicator, as it is not activated automatically.
Activating the carbon filter saturation indicator:
Switch the hood OFF and keep buttons “2” and “3” pressed
at the same time for 3 seconds”.
LEDs “L1” and “L2” will blink for 2 seconds”.
Deactivating the carbon filter saturation indicator:
Switch the hood OFF and keep buttons “2” and “3” pressed
at the same time for 3 seconds”.
LED “L1” will blink for 2 seconds”.
Automatic operation
The system default setting is manual mode; press button “4”
to activate automatic mode”.
The system provides for automatic operation in 2 modes:
- COOKING mode, which guarantees correct extraction of
fumes during cooking.
- AIR QUALITY CONTROL mode, which is a monitoring
system that guarantees a high air quality level.
The 2 modes are activated cyclically by pressing button “4”.
COOKING mode LED “L5” (amber) on.
During cooking, the system promptly reacts to Steam/Gas
increases and remains at the set speed for at least 1 minute,
before returning to the lowest speed/switching off.
FINNL P I GR
E
S
N
DK
D
F
GB
CZ SK H
PL
RUS
BG
RO
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool akr 799 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool akr 799 ix in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool akr 799 ix

Whirlpool akr 799 ix Installation Guide - German - 12 pages

Whirlpool akr 799 ix Installation Guide - Dutch - 12 pages

Whirlpool akr 799 ix Installation Guide - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info