Crockery and cutlery...Possible causes...Solutions...
...are not perfectly clean/have food
residues
-Too little space between dishes (incorrect
arrangement of the concave items in the rack).
-Arrange crockery so that items do not touch each other. Concave items (e.g.
bowls, cups) must be arranged facing downwards in the rack.
-Too little detergent; detergent too old or
incorrectly stored.
-If necessary, use more detergent, observing the manufacturer’s indications as
regards dosage. Always store detergent in a dry place and do not store it for
excessively long periods of time.
-Temperature not high enough for heavily
soiled crockery.
-For heavily soiled crockery, select a wash program with a higher temperature (see
Table of programs - chapter “Chart” - page 2).
-Loading of the dishwasher using lower and
upper rack at the same time with “Half
load/Multizone” option.
-If you select the “Half load/Multizone” option (if available), remember to load only
the upper rack or only the lower rack to increase washing power and thus obtain
optimum wash results.
-Frequent use of Eco 50°C.
-In the event of frequent use of the Eco 50°C program (if available), from time to
time select the Intensive 65°C program (if available).
-Clogged spray arms, dirty filters or not
fitted correctly.
-The spray arms must not be clogged, the filters must not be dirty and must be
fitted correctly (see page 8, “Maintenance and care“).
-Spray arms stuck impeded by crockery or
cutlery.
-The spray arms must be able to turn freely and must not be impeded by crockery or cutlery.
...salt indicator lit-Use tablets for soft water.-Set “Tablet” option; if this option is not available, it is normal for the salt indicator to light up.
...have deposits: regeneration salt
residue
-Water too hard.-In areas with very hard water, more regeneration salt needs to be added (see page 3,
“How to set water hardness”).
-Salt reservoir cap open.-Close the salt reservoir cap properly.
-Not enough rinse aid.-If you use a combined action detergent, try adding more rinse aid.
...are not dry-Plastic containers dry badly.-Synthetic materials do not dry well; if wet at end of cycle, wipe dry.
-Clean dishes left in dishwasher for a long
time after end of cycle (e.g. when using
“Delayed start” option).
-In this situation, the presence of drops of water on dishes and on the sides of the
dishwasher is normal.
Try releasing the door 5 minutes before removing the dishes.
-Incorrect arrangement of the concave
items in the rack.
-Arrange crockery so that water does not collect in cavities.
-Incorrect dosage the rinse aid.-Increase the dosage of rinse aid (see page 4, “Adding rinse aid”).
-Rapid program selected.-The Rapid program 40°C / 45°C is intended for quickly washing lightly soiled
dishes. If used for a full load of medium/heavy soiled dishes, the dishes may not dry
completely. If so, select a standard-length program. For best results, open the door
after the end of the program and wait 15 minutes before unloading the dishwasher.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool ADPU 2330 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool ADPU 2330 in the language / languages: English as an attachment in your email.
The manual is 3,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
