123639
5
Zoom out
Zoom in
Previous page
1/9
Next page
15
HOW TO FILL THE SALT CONTAINER
From a water hardness category of 1-2 (medium), before using the
dishwasher, fill the salt container with regeneration salt (to find out the
hardness level of water in your area, contact your local Water Board or
check the last bill you received).
If the water hardness level does not correspond to position 3 on the
selector (factory setting) or if the water hardness level changes:
Set the water hardness level:
setting must be carried out according to the following table:
Switch on the appliance (consult the quick reference guide).
Select program 2.
Press the Start button for at least 5 seconds until the Start indicator
lamp flashes.
The Start indicator lamp flashes in relation to the water hardness set
(table, flashing frequency).
With each successive touch of the Start button the setting increases
and when it reaches 7 it returns to 1 again.
Switch off the appliance (consult the quick reference guide).
The selected setting is now memorized.
Hardness
level
German
degrees
°dH
French
degrees
°fH
mmol/l Clarke
scale or
English
degrees
°eH
Setting
Flashing
frequency
(1x-7x)
1 soft 0 - 5 0 - 9 0 - 0.9 0 - 6.3 1x
1 - 2 medium 6 - 10 10 - 18 1.0 - 1.8 7 - 12.6 2x
2 average 11 - 15 19 - 27 1.9 - 2.7 13.3 - 18.9 3x
3 medium-hard 16 - 21 28 - 37 2.8 - 3.7 19.6 - 25.9 4x
4 hard 22 - 28 38 - 50 3.8 - 5.0 26.6 - 35 5x
4 very hard 29 - 35 51 - 63 5.1 - 6.3 35.7 - 44.1 6x
4 extremely
hard
36 - 60 64 - 107 6.4 - 10.7 44.8 - 74.9 7x
If the water hardness level falls within
category 1 (soft), no salt is required.
How to fill the salt container
Warning: Only use regeneration salts for use in domestic
dishwashers!
Do not fill the salt container with unsuitable substances, such as detergent,
as this will cause irreparable damage to the water softener system.
1.
Remove the lower rack.
2.
Unscrew the cap by turning it counter-clockwise.
3.
When first using the dishwasher: fill the salt container to the rim with
water.
4.
Fill the salt container to the rim with salt (using the filler provided)
(when filling for the first time use min. 1.5 kg and max. 2 kg) and
stir with a spoon handle.
5.
Screw the cap back on by turning it clockwise.
6.
Fit the lower rack.
7.
If regeneration salt is to be added,
immediately
start a wash
programme (rinsing alone is not sufficient) in order to eliminate
any residual saline solution straight away and avoid corrosion.
Salt level indicator
The dishwasher is equipped with an electric or visual salt level
indicator (depending on the model installed).
Electric indicator
The salt level indicator lamp on the control panel lights up when the
salt container is empty.
Visual indicator
The float is clearly visible in the cap window when the salt container is full.
The float lowers and is no longer visible when the salt container is empty.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool adp emotion at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool adp emotion in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool adp emotion

Whirlpool adp emotion Quick start guide - English - 4 pages

Whirlpool adp emotion Quick start guide - German - 4 pages

Whirlpool adp emotion User Manual - German - 9 pages

Whirlpool adp emotion Quick start guide - Dutch - 4 pages

Whirlpool adp emotion User Manual - Dutch - 8 pages

Whirlpool adp emotion Quick start guide - French - 4 pages

Whirlpool adp emotion User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info