450713
5
Zoom out
Zoom in
Previous page
1/8
Next page
14
HOW TO FILL THE SALT CONTAINER
From a water hardness category of 2 to 4, before using the dishwasher
for the first time, fill the salt container with approximately 2 kg.
regeneration salt and add 1lt water (to find out the hardness level of
water in your area, contact your local Water Board or check the last bill
you received).
If the water hardness level does not correspond to position 3 on the
selector (factory setting) or if the water hardness level changes:
Turn the selector to the correct position:
Set the water hardness by turning the selector fitted inside the
dishwasher on the left hand internal wall by using a coin.
Use the table below to set the dial to the correct setting:
Hardness
level
German
degrees
°dH
French
degrees
°fH
mmol/l Clarke scale
or English
degrees
°eH
Setting
1 soft 0 - 6 0 - 11 0,0 - 1,1 0 - 7.5 1
2 average 7 - 13 12 - 23 1,2 - 2,3 8.8 - 16.3 2
3 medium 14 - 20 24 - 36 2,4 - 3,6 17.5 - 25.0 3
4 hard 21 - 35 37 - 63 3,7 - 6,3 26.3 - 43.8 4
If the water hardness level falls within
category 1 (soft), no salt is required.
How to fill the salt container
Warning: Only use regeneration salts for use in domestic dishwashers!
Do not fill the salt container with unsuitable substances, such as
detergent, as this will cause irreparable damage to the water softener
system.
1.
Remove the lower rack.
2.
Unscrew the cap by turning it counter-clockwise.
3.
When first using the dishwasher: fill the salt container to the rim
with water (approx. 1 lt.).
4.
Fill the salt container to the rim with regeneration salt (using the
filler provided) (when filling for the first time use min. 1.5 kg and
max. 2 kg) and stir with a spoon handle.
5.
Screw the cap back on by turning it clockwise.
6.
Fit the lower rack.
7.
If regeneration salt is to be added,
immediately
start a wash
programme (rinsing alone is not sufficient) in order to eliminate
any residual saline solution straight away and avoid corrosion.
Salt level indicator
The dishwasher is equipped with an electric or visual salt level
indicator (depending on the model installed).
Electric indicator
The salt level indicator lamp on the control panel lights up when the
salt container is empty.
Visual indicator
The float is clearly visible in the cap window when the salt container
is full.
The float lowers and is no longer visible when the salt container is
empty.
3gb94300.fm Page 14 Thursday, April 4, 2002 3:54 PM
Black process 45.0° 100.0 LPI
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool ADP 543 WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool ADP 543 WH in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool ADP 543 WH

Whirlpool ADP 543 WH User Manual - German - 8 pages

Whirlpool ADP 543 WH User Manual - Dutch - 9 pages

Whirlpool ADP 543 WH User Manual - French - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info