127503

Whirlpool adg 9928 1 Manual

1
Zoom out
Zoom in
Previous page
1/8
Next page
Whirlpool is a registered trademark of Whirlpool USA
5019 396 01127
Before using the dishwasher, read the
installation and maintenance instructions carefully!
1
GB
ADG 9928
1) Programme data obtained in conformity with European standard EN 50242. Values may vary in relation to usage, e.g.
different loads, options, different sensor settings (only with sensor programmes), different water supply temperatures, as well
as water hardness and power supply voltage.
2) Reference programme for energy label in compliance with EN 50242. - Important information for Test Laboratories:
for
detailed information on the EN/Standard loading comparison test and other tests, contact the following address:
“nk_customer@whirlpool.com”.
1. OVERVIEW
ON button
OFF button
Programme selection button
Press button P (repeatedly) until the required
programme number appears on the display.
Fault indication and wash time display
In normal operation it indicates the remaining time
(h:mm), whereas with “Delayed start” selected it
indicates the time remaining until programme start (hh).
In the presence of a fault indication “F.” –, consult the
section “5. What to do if…”.
Rinse aid level indicator and salt level indicator
They light up when rinse aid or salt need to be added.
Add just before starting a wash cycle.
Set the detergent
Press button P (repeatedly) to set the type of detergent used.
This deactivates the rinse aid and/or salt indicator.
Powder, gel, tablets
(standard):
indicator off
Detergent with rinse aid: left indicator
Detergent with salt + rinse aid: right indicator
“Delayed start” button
Press the button (repeatedly) to delay the start of the
programme. Adjustable from 1 to 24 hours. With each
press of the button, the delayed start indicator increases by
one hour and after 24 restarts from 00. Then press the
START button. The dishwasher will start after the set time.
START button
The indicator lights up during operation, flashes when a
fault occurs, and goes off at the end of the programme.
RESET button - for programme change or indication of faults
Press this button to cancel a started programme and
selected extra functions. Press this button to cancel the
main fault indicators (F..); also refer to the section “5.
What to do if...”. The programme can then be selected
and started.
Running programme indicator
A LED light projected on the floor indicates that the
dishwasher is working.
Table 1.1.
Programme chart
Detergent
dispenser
Consumption
1)
P
Programmes
Available
options
Loading instructions large small Litres kWh Minutes
1
Auto Sensor 50-65°C
Recommended programme for
routine washes, with dried-on
food (e.g. EN 50242).
X X 11-16 1.10-1.50 100-130 ±
1)
2
Quickwash 40°C
Lightly soiled crockery, with no
dried-on food.
X — 10.0 0.65 30 ±
1)
3
Bio
2)
50°C
Normally soiled crockery.
Energy saving programme.
X X 12.0 1.05 165 ±
1)
4
Intensive 70°C
Recommended programme for
heavily soiled crockery,
especially suitable for pans and
saucepans.
X X 14.0 1.55 155 ±
1)
5
Half Load 50°C
Ideal for washing a half load of
lightly or normally soiled
crockery.
X X 10.0 1.04 145 ±
1)
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool adg 9928 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool adg 9928 1 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool adg 9928 1

Whirlpool adg 9928 1 User Manual - Dutch - 8 pages

Whirlpool adg 9928 1 User Manual - French - 8 pages

Whirlpool adg 9928 1 User Manual - Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info