542496
10
Zoom out
Zoom in
Previous page
1/12
Next page
Models
8.1 Pro 8.2 Pro
Type 2 WAY 2 WAY
Usable frequency response 50Hz-24kHz 45Hz-24kHz
Peak SPL @ 1m, short term IEC noise source 106dB 108dB
Sensitivity 86dB 86dB
Power Handling (Watts) 100 W 100 W
Recommended amp power 30-150W 30-200W
Impedance nominal 4Ω 4Ω
Drive Units 5"LF, 1" HF 6.5" LF, 1" HF
System Magnetic Shielding Yes Yes
Crossover frequency 2.2K 2.2K
Input connectors 1 x phono speakon type /jack combo
Input connectors (active) 1 x phono (unbalanced) 1 x XLR-1/4 jack combo balanced
Active ie slew rate, distortion 10v/micro s 10v/ micro s
Finish IRIDIUM color laminate IRIDIUM color laminate
Dimensions H x W x D (mm) 295 x 198 x 252 364 x 212 x 257
Dimensions of Active H x W x D (mm) 295 x 198 x 280 364 x 212 x 322
Weight (each kg) 5.2kg 6.2kg
Weight of active unit (each kg) 7.5kg 8.0kg
Active units only:
Usable frequency range 50Hz-24kHz 45Hz-24kHz
Drive units 5" LF, 1" HF 6.5" LF, 1" HF
Crossover frequency 2.0K 1.9K
Output SPL ((from peak power) 106dB 108dB
IEC weighted noise @ 1m)
Bi-amplifier power (LF/HF) 60W LF + 40W HF 60W LF + 40W HF
Input sensitivity 0.775V RMS (0 dBu) 0.775V RMS (0 dBu)
Amplifier system distortion at 0.1% @ 50W 0.1% @ 50W
System Magnetic Shielding Yes Yes
Signal to noise ratio 100dB 100dB
Mains voltage:
Voltage operating range at:
230V setting 205-250V 205-250V
115V setting 100-130V 100-130V
Power consumption:
Idle 22W 22W
Full output 130W 130W
Maintenance:
The high quality finish on your Diamond Pro is generally not in need of any care or
attention. Do not use abrasives or abrasive materials to clean the enclosure since the
finish may be marred. Never use water on or near electrical equipment.
The Diamond Pro-Active heat sink must be checked for clearance from obstructions,
lint fluff or anything that might cause overheating.
Safety:
Always use grounded A/C power. Take care to mount and operate your equipment in a
safe manner. Avoid exposure to rain and water.
Accessories:
Diamond Pro Series Subwoofer.
7
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wharfedale DIAMOND 8.1 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wharfedale DIAMOND 8.1 PRO in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info