784859
107
Zoom out
Zoom in
Previous page
1/108
Next page
When we do not use the spa often, mostly in the winter
(around 3 times a week), which is the most energy effi-
cient setting, taking into account the energy necessary
for reheating? We only use it a couple of times a week,
37 degrees Celsius is our favourite temperature. Should
it be in Sleep or Economy mode? Should I switch to the
Standard setting only when heating the spa? Or should
it always stay on Standard?
If you only use it 2-3 times a week, the most efficient
way is to keep the water at operational temperature (38
degrees Celsius). Thanks to the excellent insulation and
the thermo cover this setting requires less energy than
letting the water cool down and reheating it before usage.
The heating system automatically switches on in case the
water temperature drops more than half a degree Celsius.
In the summer the Economy setting is recommended as
the external temperature is usually high. Only use the Sleep
setting if you are not using the spa for a longer period of
time (3-4 weeks).
Does the spa switch back to the last used setting if
there is a power outage?
When connecting the spa to the power supply it switches
to charging mode. Push the “Temp” button to set it to the
Standard setting and it will display the water temperature.
The spa will switch back to the last used setting after a
power outage.
Can the filtration cycle only be programmed to 1-8
hour periods? Is there something like a 3-hour period?
What is ideal and what is adequate?
The filtration cycle can be set to 1-8 hour or continuous
settings. If you have a spa equipped with the in.clear auto-
matic water management system, a daily 8-hour circulation
period is recommended to produce necessary amounts of
bromine. The 8-hour (2x4 hour) setting is ideal.
Can the operating device for our spa be placed in an
external location where only the staff can access it?
The operating device can only be placed 5 meters cable
length away from the spa.
What is the service life of the UV-C lamp?
If the filtration cycle is set to the continuous (0-24) setting,
then the service life of the UV-C lamp is 8000-9000 hours.
With continuous setting the most effective water disinfec-
tant system can reduce the necessary amount of chemicals
by 30-50% depending on usage.
IN.CLEAR
Why is the water turbulent/oily?
If the water is turbulent or oily after heavy usage, perform a
refill and wait 24 hours until conditions are suitable for us-
age. If the problem persists, contact your service provider
to perform the necessary water equilibriation.
Does sodium-bromide vaporize?
No. Sodium-bromide will only leave the spa in case of splashing,
leaking, or draining.
What should I use to clean my spa?
Only nonfoaming nonacerbic cleaning products available
at professional dealerships.
If the in.clear bromine generator is switched off, is the
spa still being disinfected by sodium bromide?
No. The in.clear system does not disinfect while switched
off. However, if there is a level of bromine left over in the
water, it will continue the disinfecting process. The In.clear
system can be switched off for certain periods of time
and the spa will remain nice and clean. Sodium bromide
becomes bromine when it passes through the electrodes
of the in.clear system, while the pump connected to the
in.clear system is operational.
FREQUENTLY ASKED QUESTIONS
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wellis W5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wellis W5000 in the language / languages: English as an attachment in your email.

The manual is 11.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wellis W5000

Wellis W5000 User Manual - German - 124 pages

Wellis W5000 User Manual - Dutch - 113 pages

Wellis W5000 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info